I gave a try. So far I had two successful backups now but in between I
also had the error near the end again.
Sounds really weird. I haven't got a clue what could be wrong here...
Thanks a lot
Am 14.01.2008 um 17:25 schrieb Arno Lehmann:
> Hi,
>
> 14.01.2008 14:35, Sönke Ebert wrote:
>> Hi
>> I have a problem with bacula 2.2.7 when backing up saying
>> 13-Jan 01:47 server-sd JobId 1071: Error: block.c:569 Write error at
>> 1:929 on device "DDS-2" (/dev/nsa0). ERR=Operation not permitted.
>> 13-Jan 01:47 server-sd JobId 1071: End of medium on Volume "Freitag"
>> Bytes=1,059,867,648 Blocks=16,428 at 13-Jan-2008 01:47.
>> 13-Jan 01:47 server-sd JobId 1071: Job Taeglich.2008-01-13_01.24.03
>> waiting. Cannot find any appendable volumes.
>> The error sometimes occurs very early but sometimes near the end of
>> the backup. I get the error with each tape (I also did mt erase and
>> wrote a new label on the tape) so it's not tape related (tapes are
>> new). Since I got problems with my old DDS drive, a Sony SDT-5000 (I
>> got ERR=Permission denied during backup), I bought another drive, a
>> Compaq SDT-9000 fw4.40. The SCSI controller, a Tekram 395U is new,
>> too.
>> I have no idea what I'm doing wrong here. Maybe it's the original
>> FreeBSD driver (FBSD 6.2). But I used it successfully for several
>> years now.
>>
>> Thanks a lot in advance
>
> Anything SCSI-related in the logs?
>
> I'm not a FreeBSD person, but at least under FreeBSD 7, these symptoms
> would indicate that the SCSI-device is unconfigured... perhaps
> whatever mechanism set the device nodes interferes in case of drive or
> SCSI-Bus problems.
>
>> (I'll attach my current bacula-sd)
>>
>> Device {
>> Name = DDS-2
>> Description = "DDS-2 Laufwerk fuer die Taegliche Sicherung"
>> Media Type = DDS-2
>> Archive Device = /dev/nsa0
>> AutomaticMount = yes; # when device opened, read it
>> AlwaysOpen = no
>
> Have you tried setting this to "yes"?
>
>> Offline On Unmount = no
>> Hardware End of Medium = no
>> BSF at EOM = yes
>> Backward Space Record = no
>> # Backward Space File = no
>> Fast Forward Space File = no
>> TWO EOF = yes
>> # LabelMedia = yes;
>> RemovableMedia = yes;
>> AutoChanger = no
>> Volume Poll Interval = 1800
>> # Alert Command = "sh -c '/usr/local/sbin/tapeinfo -f /dev/pass0 |
>> grep TapeAlert|cat'"
>> }
>
> Arno
>
>>
>> -------------------------------------------------------------------------
>> Check out the new SourceForge.net Marketplace.
>> It's the best place to buy or sell services for
>> just about anything Open Source.
>> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
>> _______________________________________________
>> Bacula-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>
> --
> Arno Lehmann
> IT-Service Lehmann
> www.its-lehmann.de
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
