En/na tomasz ha escrit:
> David wrote:
>
>> En/na Arno Lehmann ha escrit:
>>
>>> Hi,
>>>
>>> 22.06.2007 13:04,, Llistes Saccharine wrote::
>>>
>>>
>>>> Hi,
>>>>
>>>> I have 'Director' and 'Storage' in a server with two ranges of LAN ip's
>>>> (192.168.1.0/24 and 192.168.2.0/24). The client with problems is in
>>>> 192.168.2.0 range. When I run a Job, the communications with the
>>>> 'Director' and the 'client' are OK, but when the 'Client' tries to
>>>> connect to the 'SD' it tries it with the 'SD' server IP on 192.168.1.0
>>>> range.
>>>>
>>>> Do I have to define in the config files any resource to determine the
>>>> route of the connection between 'FD' and 'SD'? I am surprised because
>>>> there isn't any problem with the connection between 'Director' and 'FD'
>>>> with range 192.168.2.0.
>>>>
>>>>
>>> Thanks Arno
>>>
>>>
>>>
>>> The server in problems only works on 192.168.2.0 range. I could not add
>>> a route to 192.168.1.0 because it must be 2 different LAN without
>>> connection between them.
>>> That sounds like a 'normal' routing problem. The FD contacts the SD.
>>> For that to work, it needs route to the 192.168.1.0 network. Is that
>>> set up?
>>>
>>>
>>>
>> Thanks Arno
>>
>> The server in problems only works on 192.168.2.0 range. I could not add
>> a route to 192.168.1.0 because it must be 2 different LAN without
>> connection between them.
>>
>>
>>> Also, it's possible that a firewall on your router blocks these accesses.
>>>
>>> In case your server is dual-homed in both networks, you will have to
>>> try to set up a storage device in the DIR pointing the FDs to the
>>> 192.168.1.0 address of your SD. I'm unsure if that works, though - I
>>> haven't worked with dual-homed Bacula installations recently. In fact,
>>> never :-)
>>>
>>>
>>>
>> I will try this solution, thanks ;) I hope it works.
>>
>> If anybody have worked with this solution, tell me if it's effective.
>>
>> Thanks to everyone
>>
>> David
>>
>
>
> u need in bacula-sd.conf some like
>
> SDAddresses = {
> ip = { addr = 192.168.1.20; port = 9103;}
> ip = { addr = 192.168.2.20; port = 9103;}
> }
>
> and the same for DIRAddresses in bacula-dir.conf
>
> it works
>
> regards
>
>
>
Thanks Tomas.
I put this new resources in 'DIR' conf and 'SD' conf but when I reload
the configuration I obtain this error:
22-Jun 13:48 bacula-dir: ERROR TERMINATION at address_conf.c:506
Config error: Can't add hostname(192.168.1.250) and port() to addrlist
(the old style addresses cannot be mixed with new style)
'SD' and 'DIR' version are 2.0.3. I search in the manual for the correct
syntax but I obtain the same syntax I put in conf files.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
