tomasz wrote:
> David wrote:
>> En/na tomasz ha escrit:
>>> David wrote:
>>>
>>>> En/na Arno Lehmann ha escrit:
>>>>
>>>>> Hi,
>>>>>
>>>>> 22.06.2007 13:04,, Llistes Saccharine wrote::
>>>>>
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> I have 'Director' and 'Storage' in a server with two ranges of LAN ip's
>>>>>> (192.168.1.0/24 and 192.168.2.0/24). The client with problems is in
>>>>>> 192.168.2.0 range. When I run a Job, the communications with the
>>>>>> 'Director' and the 'client' are OK, but when the 'Client' tries to
>>>>>> connect to the 'SD' it tries it with the 'SD' server IP on 192.168.1.0
>>>>>> range.
>>>>>>
>>>>>> Do I have to define in the config files any resource to determine the
>>>>>> route of the connection between 'FD' and 'SD'? I am surprised because
>>>>>> there isn't any problem with the connection between 'Director' and 'FD'
>>>>>> with range 192.168.2.0.
>>>>>>
>>>>>>
>>>>> Thanks Arno
>>>>>
>>>>>
>>>>>
>>>>> The server in problems only works on 192.168.2.0 range. I could not add
>>>>> a route to 192.168.1.0 because it must be 2 different LAN without
>>>>> connection between them.
>>>>> That sounds like a 'normal' routing problem. The FD contacts the SD.
>>>>> For that to work, it needs route to the 192.168.1.0 network. Is that
>>>>> set up?
>>>>>
>>>>>
>>>>>
>>>> Thanks Arno
>>>>
>>>> The server in problems only works on 192.168.2.0 range. I could not add
>>>> a route to 192.168.1.0 because it must be 2 different LAN without
>>>> connection between them.
>>>>
>>>>
>>>>> Also, it's possible that a firewall on your router blocks these accesses.
>>>>>
>>>>> In case your server is dual-homed in both networks, you will have to
>>>>> try to set up a storage device in the DIR pointing the FDs to the
>>>>> 192.168.1.0 address of your SD. I'm unsure if that works, though - I
>>>>> haven't worked with dual-homed Bacula installations recently. In fact,
>>>>> never :-)
>>>>>
>>>>>
>>>>>
>>>> I will try this solution, thanks ;) I hope it works.
>>>>
>>>> If anybody have worked with this solution, tell me if it's effective.
>>>>
>>>> Thanks to everyone
>>>>
>>>> David
>>>>
>>> u need in bacula-sd.conf some like
>>>
>>> SDAddresses = {
>>> ip = { addr = 192.168.1.20; port = 9103;}
>>> ip = { addr = 192.168.2.20; port = 9103;}
>>> }
>>>
>>> and the same for DIRAddresses in bacula-dir.conf
>>>
>>> it works
>>>
>>> regards
>>>
>>>
>>>
>> Thanks Tomas.
>>
>> I put this new resources in 'DIR' conf and 'SD' conf but when I reload
>> the configuration I obtain this error:
>> 22-Jun 13:48 bacula-dir: ERROR TERMINATION at address_conf.c:506
>> Config error: Can't add hostname(192.168.1.250) and port() to addrlist
>> (the old style addresses cannot be mixed with new style)
>>
>> 'SD' and 'DIR' version are 2.0.3. I search in the manual for the correct
>> syntax but I obtain the same syntax I put in conf files.
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> Bacula-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>>
> <config>
> Director { # define myself
> Name = myserver-dir
> DIRAddresses = {
> ip = { addr = 192.168.1.250; port = 9101;}
> ip = { addr = 192.168.2.250; port = 9101;}}
> QueryFile = "/usr/local/share/bacula/query.sql"
> WorkingDirectory = "/var/db/bacula"
> PidDirectory = "/var/run"
> Maximum Concurrent Jobs = 1
> Password = "xxxxxxxxxxxxxxxxxx" # Console password
> Messages = Daemon
> }
> </config>
>
>
> this is my part of this config (with your IPs)
> im running bacula 2.0.3 without problem at all
>
> and SD
>
> <config>
> Storage { # definition of myself
> Name = myserver-sd
> SDAddresses = {
> ip = { addr = 192.168.1.250; port = 9101;}
> ip = { addr = 192.168.2.250; port = 9101;}}
> }
> WorkingDirectory = "/var/db/bacula"
> Pid Directory = "/var/run"
> Maximum Concurrent Jobs = 20
> }
> </config>
>
>
> are u sure u r not filtering this traffic or something??
>
of course ports for SD should be 9103
sorry
--
bEsT rEgArDs | "Confidence is what you have before you
tomasz dereszynski | understand the problem." -- Woody Allen
TD840-RIPE |
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
