Hi,
On 5/10/2007 8:17 PM, Mike Vasquez wrote:
> I just upgraded to 2.0.3. I am having problems mounting the Autochanger.
> Here are my test results.
>
> tapeinfo -f /dev/sg0
> Product Type: Medium Changer
> Vendor ID: 'DELL '
> Product ID: 'PV-122T '
> Revision: 'D37r'
> Attached Changer: No
> SerialNumber: '3123B92743'
> Invalid tapealert page: 0
>
> mtx -f /dev/sg0 inquiry
> Product Type: Medium Changer
> Vendor ID: 'DELL '
> Product ID: 'PV-122T '
> Revision: 'D37r'
> Attached Changer: No
>
> /btape /dev/nst0
> Tape block granularity is 1024 bytes.
> btape: butil.c:286 Using device: "/dev/nst0" for writing.
> 10-May 10:20 btape: 3301 Issuing autochanger "loaded? drive 0" command.
> 10-May 10:20 btape: 3991 Bad autochanger "loaded? drive 0" command: ERR=No
> such file or directory.
> Results=
> ## It just hangs here.
Probably it doesn't find the mtx-changer script (or whatever it tries to
use in your case - I always use btabe with the SD configuration).
> When I try to mount to take using the console here is what I get.
>
> SD.conf file
> Autochanger {
> Name = Autochanger
> Device = ToTape.0
> Changer Command = "/opt/bacula/bin/mtx-changer %c %o %S %a %d"
Are you sure the Bacula user can run this script, and it works as expected?
> ChangerDevice = /dev/sg0
> }
>
> Device {
> Name = ToTape.0 #
> Drive Index = 0
> Media Type = LTO-1
> Archive Device = /dev/nst0
> AutomaticMount = yes;
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
...
> *mount ToTape
> Connecting to Storage daemon ToTape at nmc-sdca-mon1:9103 ...
> Enter autochanger slot: 1
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
> directory.
Looks like the SD, too, can't run mtx-changer.
> Results=
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
> directory.
> Results=
> 3304 Issuing autochanger "load slot 1, drive 0" command.
> 3992 Bad autochanger "load slot 1, drive 0": ERR=No such file or directory.
> Results=
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
> directory.
> Results=
> 3901 open device failed: ERR=dev.c:425 Unable to open device "ToTape.0"
> (/dev/nst0): ERR=Input/output error
>
> What could be wrong. It was working before I upgraded.
Permissions, probably. It's possible that, before the upgrade, the SD
ran as root and it now runs as a different user.
Arno
> Mike
>
>
>
>
>
>
>
>
>
>
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
