Now I am getting a new error,
nmc-sdca-mon1:/etc/bacula# mtx -f /dev/sg0 inquiry
mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=0 (Unknown?!)
mtx: Request Sense: Sense Key=No Sense
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 00
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
INQUIRY Command Failed
Wondering what is going on?
Mike
Mike Vasquez wrote:
>
> I ran mt -f /dev/nst0 status as the bacula user and got the following:
> /dev/nst0: Input/output error
>
> Then I ran mtx -f /dev/nst0 inquire as root and got the following:
> cannot open SCSI device '/dev/nst0' - Input/output error
>
> Mike
>
> Arno Lehmann wrote:
>>
>> Hi,
>>
>> On 5/11/2007 12:04 AM, Mike Vasquez wrote:
>>> In my /etc/init.d/bacula-sd script the argument that I use to start the
>>> bacula sd daemon is
>>>
>>> ARGS="-c /opt/bacula/bacula-sd.conf -u root -g tape"
>>
>> So the SD runs as root. Ok.
>>
>> And how about this one:
>>
>> Trying 'mt -f /dev/nst0 status' as the Bacula user should work, and if
>> it doesn't, it might tell us something...
>>
>> Arno
>>
>>> Mike
>>>
>>>
>>> Arno Lehmann wrote:
>>>> Hi,
>>>>
>>>> On 5/10/2007 11:41 PM, Mike Vasquez wrote:
>>>>> Boy, I do need new glasses, Changer Command =
>>>>> "/opt/bacula/bin/mtx-changer
>>>>> %c %o %S %a %d".
>>>>>
>>>>> It should have been Changer Command =
>>>>> "/opt/bacula/scripts/mtx-changer
>>>>> %c
>>>>> %o %S %a %d"
>>>> Yeah, that's what you get for customizing your installation ;-) I can
>>>> assure you, though, that glasses don't necessarily help with this sort
>>>> of problems :-)
>>>>
>>>>> Now I am getting the following error:
>>>>>
>>>>> bin/btape /dev/nst0
>>>>> Tape block granularity is 1024 bytes.
>>>>> btape: butil.c:286 Using device: "/dev/nst0" for writing.
>>>>> 10-May 14:26 btape: 3301 Issuing autochanger "loaded? drive 0"
>>>>> command.
>>>>> 10-May 14:26 btape: 3302 Autochanger "loaded? drive 0", result is Slot
>>>>> 1.
>>>>> 10-May 14:31 btape: Fatal Error at device.c:280 because:
>>>>> dev open failed: dev.c:425 Unable to open device "Drive-1"
>>>>> (/dev/nst0):
>>>>> ERR=Input/output error
>>>>>
>>>>> 10-May 14:31 btape: btape Fatal error: butil.c:195 Cannot open
>>>>> "Drive-1"
>>>>> (/dev/nst0)
>>>> Have you tried to access the tape drive as the user the SD runs as?
>>>>
>>>> "permission denied" or "no such file" would be what I expected, but
>>>> "cannot open" might also indicate a permissions problem or, perhaps,
>>>> the
>>>> tape is not fully loaded into the drive, or something.
>>>>
>>>> Trying 'mt -f /dev/nst0 status' as the Bacula user should work, and if
>>>> it doesn't, it might tell us something...
>>>>
>>>> Arno
>>>>
>>>>
>>>>> Here is the Drive-1 configuration.
>>>>> SD.conf file (New)
>>>>> Autochanger {
>>>>> Name = Autochanger
>>>>> Device = Drive-1
>>>>> Changer Command = "/opt/bacula/scripts/mtx-changer %c %o %S %a %d"
>>>>> Changer Device = /dev/sg0
>>>>> }
>>>>>
>>>>> Device {
>>>>> Name = Drive-1
>>>>> Drive Index = 0
>>>>> Media Type = LTO-1
>>>>> Archive Device = /dev/nst0
>>>>> AutomaticMount = yes;
>>>>> AlwaysOpen = yes;
>>>>> RemovableMedia = yes;
>>>>> RandomAccess = no;
>>>>> AutoChanger = yes
>>>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>>> }
>>>>>
>>>>> Any Ideas.
>>>>>
>>>>> Mike
>>>>>
>>>>> Arno Lehmann wrote:
>>>>>> Hi,
>>>>>>
>>>>>> On 5/10/2007 8:17 PM, Mike Vasquez wrote:
>>>>>>> I just upgraded to 2.0.3. I am having problems mounting the
>>>>>>> Autochanger.
>>>>>>> Here are my test results.
>>>>>>>
>>>>>>> tapeinfo -f /dev/sg0
>>>>>>> Product Type: Medium Changer
>>>>>>> Vendor ID: 'DELL '
>>>>>>> Product ID: 'PV-122T '
>>>>>>> Revision: 'D37r'
>>>>>>> Attached Changer: No
>>>>>>> SerialNumber: '3123B92743'
>>>>>>> Invalid tapealert page: 0
>>>>>>>
>>>>>>> mtx -f /dev/sg0 inquiry
>>>>>>> Product Type: Medium Changer
>>>>>>> Vendor ID: 'DELL '
>>>>>>> Product ID: 'PV-122T '
>>>>>>> Revision: 'D37r'
>>>>>>> Attached Changer: No
>>>>>>>
>>>>>>> /btape /dev/nst0
>>>>>>> Tape block granularity is 1024 bytes.
>>>>>>> btape: butil.c:286 Using device: "/dev/nst0" for writing.
>>>>>>> 10-May 10:20 btape: 3301 Issuing autochanger "loaded? drive 0"
>>>>>>> command.
>>>>>>> 10-May 10:20 btape: 3991 Bad autochanger "loaded? drive 0" command:
>>>>>>> ERR=No
>>>>>>> such file or directory.
>>>>>>> Results=
>>>>>>> ## It just hangs here.
>>>>>> Probably it doesn't find the mtx-changer script (or whatever it tries
>>>>>> to
>>>>>> use in your case - I always use btabe with the SD configuration).
>>>>>>
>>>>>>> When I try to mount to take using the console here is what I get.
>>>>>>>
>>>>>>> SD.conf file
>>>>>>> Autochanger {
>>>>>>> Name = Autochanger
>>>>>>> Device = Drive-1
>>>>>>> Changer Command = "/opt/bacula/bin/mtx-changer %c %o %S %a %d"
>>>>>> Are you sure the Bacula user can run this script, and it works as
>>>>>> expected?
>>>>>>
>>>>>>> ChangerDevice = /dev/sg0
>>>>>>> }
>>>>>>>
>>>>>>> Device {
>>>>>>> Name = Drive-1 #
>>>>>>> Drive Index = 0
>>>>>>> Media Type = LTO-1
>>>>>>> Archive Device = /dev/nst0
>>>>>>> AutomaticMount = yes;
>>>>>>> AlwaysOpen = yes;
>>>>>>> RemovableMedia = yes;
>>>>>>> RandomAccess = no;
>>>>>>> AutoChanger = yes
>>>>>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>>>>> }
>>>>>> ...
>>>>>>> *mount ToTape
>>>>>>> Connecting to Storage daemon ToTape at nmc-sdca-mon1:9103 ...
>>>>>>> Enter autochanger slot: 1
>>>>>>> 3301 Issuing autochanger "loaded? drive 0" command.
>>>>>>> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
>>>>>>> directory.
>>>>>> Looks like the SD, too, can't run mtx-changer.
>>>>>>
>>>>>>> Results=
>>>>>>> 3301 Issuing autochanger "loaded? drive 0" command.
>>>>>>> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
>>>>>>> directory.
>>>>>>> Results=
>>>>>>> 3304 Issuing autochanger "load slot 1, drive 0" command.
>>>>>>> 3992 Bad autochanger "load slot 1, drive 0": ERR=No such file or
>>>>>>> directory.
>>>>>>> Results=
>>>>>>> 3301 Issuing autochanger "loaded? drive 0" command.
>>>>>>> 3991 Bad autochanger "loaded? drive 0" command: ERR=No such file or
>>>>>>> directory.
>>>>>>> Results=
>>>>>>> 3901 open device failed: ERR=dev.c:425 Unable to open device
>>>>>>> "ToTape.0"
>>>>>>> (/dev/nst0): ERR=Input/output error
>>>>>>>
>>>>>>> What could be wrong. It was working before I upgraded.
>>>>>> Permissions, probably. It's possible that, before the upgrade, the SD
>>>>>> ran as root and it now runs as a different user.
>>>>>>
>>>>>> Arno
>>>>>>
>>>>>>> Mike
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> --
>>>>>> IT-Service Lehmann [EMAIL PROTECTED]
>>>>>> Arno Lehmann http://www.its-lehmann.de
>>>>>>
>>>>>> -------------------------------------------------------------------------
>>>>>> This SF.net email is sponsored by DB2 Express
>>>>>> Download DB2 Express C - the FREE version of DB2 express and take
>>>>>> control of your XML. No limits. Just data. Click to get it now.
>>>>>> http://sourceforge.net/powerbar/db2/
>>>>>> _______________________________________________
>>>>>> Bacula-users mailing list
>>>>>> [email protected]
>>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>>>
>>>>>>
>>>> --
>>>> IT-Service Lehmann [EMAIL PROTECTED]
>>>> Arno Lehmann http://www.its-lehmann.de
>>>>
>>>> -------------------------------------------------------------------------
>>>> This SF.net email is sponsored by DB2 Express
>>>> Download DB2 Express C - the FREE version of DB2 express and take
>>>> control of your XML. No limits. Just data. Click to get it now.
>>>> http://sourceforge.net/powerbar/db2/
>>>> _______________________________________________
>>>> Bacula-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>
>>>>
>>>
>>
>> --
>> IT-Service Lehmann [EMAIL PROTECTED]
>> Arno Lehmann http://www.its-lehmann.de
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> Bacula-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>>
>
>
--
View this message in context:
http://www.nabble.com/Autochanger-problem-tf3723302.html#a10434472
Sent from the Bacula - Users mailing list archive at Nabble.com.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
