Hello,
Congratulations on being the first person to actually present a Migration
problem and for providing lots of nice information ! :-)
On Wednesday 13 September 2006 20:13, Your Name wrote:
> Greetings,
>
> I have a simple setup, I've included my conf files below. here's the
> situation.
>
> I have one client, (the bacula server) one tape drive (exabyte vx-2
> external drive, no changer) one tape volume, one "File" volume.
>
> 2 backup jobs, one of /home, and one of the catalog.
>
> I can pass all the hardware tests etc. here's my process.
>
> drop the database, reload a clean database. delete the backup file
> volumes from the directory. fresh. start the 3 bacula daemons using
> the conf files below.
>
> label a volume for the File pool, label a tape for the tape pool.
> everything is good.
>
> run the fd backup, writes to the file. good
> run the catalog backup, it writes to file as well.
>
> I then update the volume to "used" so it can be eligable for migration.
>
> I run the migrate-volume job, and I get:
> ###############################################
> the following 1 jobIDs will be migrated :1
> Migration using JobID=1 job=client1.2006-09-13_11.06.14
> Bootstrap records written to /opt/bacula/working/adcd1149-
> dir.restore.1.bsr
>
> the job will require the following
> volume Backup00001| Storage(s) File| SD Devices FileStorage
> #################################################
>
> and the job is then waiting for max storage jobs.
>
> output for status storage=file=
>
> #################################################
>
> Running jobs: No Jobs Running
> ====
> Jobs waiting to reserve a drive:
> ====
> Terminated Jobs:
> jobID level files bytes status finnished name
> 1 full 7059 198.9M OK 13-sep-06 11:06 client1
> 2 full 1 848.7k OK 13-sep-06 11:08 backupcatatlog
> ====
> device status:
> Device "FileStorage" (/bacvols/volumes) is not open
> Device "Drive-1" (/dev/nst0) os mounted with Volume="Tape00001"
> Pool="Unknown"
> total bytes Read=0 blocks read =0 bytes/block=0
> ===
> In use volume status
> Tape00001 on device "Drive-1" (/dev/nst0)
> ====
>
> so I'm kind of stuck
>
> I've been fighting it for a day and a half now, and I'm not sure what
> I'm doing wrong, its probably something obvious, but for some reason,
> I'm blind to it..
Why don't you try to set Maximum Concurrent Jobs = 20 in your bacula-dir.conf?
I suspect that the Director is having problems running jobs.
If the problem persists, you can do two additional things:
1. Show us the output of "status dir" so we can see what the Director has
running.
2. Try running the director with debug level 100 (i.e. -d100) on the command
line. That should show us if anything is getting hung up in the reservation
system.
Regards,
Kern
>
> below are my conf files. if there is more information you would like,
> please let me know, and I'll provide it
>
> scroll down if you dare...
> #
> # For Bacula release 1.39.22 (08 Septermber 2006) -- mandrake release
> #
> # You might also want to change the default email address
> # from root to your address. See the "mail" and "operator"
> # directives in the Messages resource.
> #
>
> Director { # define myself
> Name = adcd1149-dir
> DIRport = 9101 # where we listen for UA connections
> QueryFile = "/opt/bacula/etc/query.sql"
> WorkingDirectory = "/opt/bacula/working"
> PidDirectory = "/opt/bacula/working"
> Maximum Concurrent Jobs = 1
> Password = "directorpassword" # Console password
> Messages = Daemon
> }
>
> JobDefs {
> Name = "DefaultJob"
> Type = Backup
> Level = Incremental
> Client = adcd1149-fd
> FileSet = "Full Set"
> # Schedule = "WeeklyCycle"
> Storage = File
> Messages = Standard
> Pool = Default
> Priority = 10
> }
>
>
> #
> # Define the main nightly save backup job
> # By default, this job will back up to disk in /tmp
> Job {
> Name = "Client1"
> JobDefs = "DefaultJob"
> # Write Bootstrap = "/opt/bacula/working/Client1.bsr"
> }
>
> # Backup the catalog database (after the nightly save)
> Job {
> Name = "BackupCatalog"
> JobDefs = "DefaultJob"
> Level = Full
> FileSet="Catalog"
> # Schedule = "WeeklyCycleAfterBackup"
> # This creates an ASCII copy of the catalog
> RunBeforeJob = "/opt/bacula/etc/make_catalog_backup bacula bacula"
> # This deletes the copy of the catalog
> RunAfterJob = "/opt/bacula/etc/delete_catalog_backup"
> # Write Bootstrap = "/opt/bacula/working/BackupCatalog.bsr"
> Priority = 11 # run after main backup
> }
>
> Job {
> Name = "Migrate-Volumes"
> Type = Migrate
> Level = Full
> Client = adcd1149-fd
> FileSet = "Full Set"
> Messages = Standard
> Storage = Tape
> Pool = Default
> Maximum Concurrent Jobs = 4
> Selection Type = Volume
> Selection Pattern = "Backup00001*"
> }
>
>
> #
> # Standard Restore template, to be changed by Console program
> # Only one such job is needed for all Jobs/Clients/Storage ...
> #
> Job {
> Name = "RestoreFiles"
> Type = Restore
> Client=adcd1149-fd
> FileSet="Full Set"
> Storage = File
> Pool = Default
> Messages = Standard
> Where = /tmp/bacula-restores
> }
>
>
> # List of files to be backed up
> FileSet {
> Name = "Full Set"
> Include {
> Options {
> signature = MD5
> }
>
> File = /home
> File = /export
> File = /export/home
> File = "c:/documents and settings/dussaulta/desktop"
> }
>
> #
> # If you backup the root directory, the following two excluded
> # files can be useful
> #
> Exclude {
> File = /proc
> File = /tmp
> File = /.journal
> File = /.fsck
> }
> }
>
> # This is the backup of the catalog
> FileSet {
> Name = "Catalog"
> Include {
> Options {
> signature = MD5
> }
> File = /opt/bacula/working/bacula.sql
> }
> }
>
> # Client (File Services) to backup
> Client {
> Name = adcd1149-fd
> Address = adcd1149
> FDPort = 9102
> Catalog = MyCatalog
> Password = "fdpassword" # password for FileDaemon
> File Retention = 30 days # 30 days
> Job Retention = 6 months # six months
> AutoPrune = yes # Prune expired Jobs/Files
> }
>
> # Definition of file storage device
> Storage {
> Name = File
> # Do not use "localhost" here
> Address = adcd1149 # N.B. Use a fully qualified name
> here
> SDPort = 9103
> Password = "sdpassword"
> Device = FileStorage
> Media Type = File
> }
> Storage {
> Name = Tape
> #Do not use "localhost" here
> Address = adcd1149 # N.B. Use a fully qualified name
> here
> SDPort = 9103
> Password = "sdpassword" # password for Storage daemon
> Device = Drive-1 # must be same as Device in
> Storage daemon
> Media Type = "VXA-2" # must be same as MediaType in
> Storage daemon
> # Autochanger = yes # enable for autochanger device
> }
>
> # Generic catalog service
> Catalog {
> Name = MyCatalog
> dbname = bacula; user = bacula; password = ""
> }
>
> #
> mailcommand = "/opt/bacula/bin/bsmtp -h localhost -f \"\(Bacula\) %
> r\" -s \"Bacula: %t %e of %c %l\" %r"
> operatorcommand = "/opt/bacula/bin/bsmtp -h localhost -f \"\(Bacula\)
> %r\" -s \"Bacula: Intervention needed for %j\" %r"
> mail = [EMAIL PROTECTED] = all, !skipped
> operator = [EMAIL PROTECTED] = mount
> console = all, !skipped, !saved
> #
> # WARNING! the following will create a file that you must cycle from
> # time to time as it will grow indefinitely. However, it will
> # also keep all your messages if they scroll off the console.
> #
> append = "/opt/bacula/working/log" = all, !skipped
> }
>
> # Message delivery for daemon messages (no job).
> Messages {
> Name = Daemon
> mailcommand = "/opt/bacula/bin/bsmtp -h localhost -f \"\(Bacula\) %
> r\" -s \"Bacula daemon message\" %r"
> mail = [EMAIL PROTECTED] = all, !skipped
> console = all, !skipped, !saved
> append = "/opt/bacula/working/log" = all, !skipped
> }
>
> # Default pool definition
> Pool {
> Name = Default
> Pool Type = Backup
> Next Pool = Tape
> Recycle = yes # Bacula can automatically
> recycle Volumes
> AutoPrune = yes # Prune expired volumes
> Volume Retention = 365 days # one year
> }
>
> Pool {
> Name = Tape
> Pool Type = Backup
> Recycle = no # Bacula can automatically recycle
> Volumes
> AutoPrune = no # Prune expired volumes
> Volume Retention = 1095 days # Three year
> }
>
> #
> # Restricted console used by tray-monitor to get the status of the
> director
> #
> Console {
> Name = adcd1149-mon
> Password = "MLhvSQMlt97xrDgR6Z6eRjxcTEWnoNWJtKssUAW1B79/"
> CommandACL = status, .status
> }
> ======================================================================
> #
> # Default Bacula Storage Daemon Configuration file
> #
> # For Bacula release 1.39.22 (08 Septermber 2006) -- mandrake release
> #
>
> Storage { # definition of myself
> Name = adcd1149-sd
> SDPort = 9103 # Director's port
> WorkingDirectory = "/opt/bacula/working"
> Pid Directory = "/opt/bacula/working"
> Maximum Concurrent Jobs = 20
> }
>
> #
> # List Directors who are permitted to contact Storage daemon
> #
> Director {
> Name = adcd1149-dir
> Password = "sdpassword"
> }
>
> #
> # Restricted Director, used by tray-monitor to get the
> # status of the storage daemon
> #
> Director {
> Name = adcd1149-mon
> Password = "mon password"
> Monitor = yes
> }
>
> #
> # Devices supported by this Storage daemon
> # To connect, the Director's bacula-dir.conf must have the
> # same Name and MediaType.
> #
>
> Device {
> Name = FileStorage
> Media Type = File
> Archive Device = /bacvols/volumes
> LabelMedia = yes; # lets Bacula label unlabeled
> media
> Random Access = Yes;
> AutomaticMount = yes; # when device opened, read it
> RemovableMedia = no;
> AlwaysOpen = no;
> }
>
>
> Device {
> Name = Drive-1 #
> Drive Index = 0
> Media Type = "VXA-2"
> Archive Device = /dev/nst0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> LabelMedia = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> # AutoChanger = yes
> # # Enable the Alert command only if you have the mtx package loaded
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
>
> #
> # Send all messages to the Director,
> # mount messages also are sent to the email address
> #
> Messages {
> Name = Standard
> director = adcd1149-dir = all
> }
> ===================================================================
> #
> # Default Bacula File Daemon Configuration file
> #
> # For Bacula release 1.39.22 (08 Septermber 2006) -- mandrake release
> #
> # There is not much to change here except perhaps the
> # File daemon Name to
> #
>
> #
> # List Directors who are permitted to contact this File daemon
> #
> Director {
> Name = adcd1149-dir
> Password = "fdpassword"
> }
>
> #
> # Restricted Director, used by tray-monitor to get the
> # status of the file daemon
> #
> Director {
> Name = adcd1149-mon
> Password = "mon-password"
> Monitor = yes
> }
>
> #
> # "Global" File daemon configuration specifications
> #
> FileDaemon { # this is me
> Name = adcd1149-fd
> FDport = 9102 # where we listen for the director
> WorkingDirectory = /opt/bacula/working
> Pid Directory = /opt/bacula/working
> Maximum Concurrent Jobs = 20
> }
>
> # Send all messages except skipped files back to Director
> Messages {
> Name = Standard
> director = adcd1149-dir = all, !skipped, !restored
> }
>
>
>
> --
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
