Fred, his comments were farther down inside the text. He suggested
increasing the max jobs, and incrementing the debug levels. Scroll
down.
On Sep 13, 2006, at 12:15 PM, Fred Dussault wrote:
> thanks for the kind words!
>
> Did you see anything blatantly and obviously wrong with my config?
>
>> Hello,
>>
>> Congratulations on being the first person to actually present a
> Migration
>> problem and for providing lots of nice information ! :-)
>>
>> On Wednesday 13 September 2006 20:13, Your Name wrote:
>>> Greetings,
>>>
>>> I have a simple setup, I've included my conf files below. here's
> the
>>> situation.
>>>
>>> I have one client, (the bacula server) one tape drive (exabyte vx-2
>>> external drive, no changer) one tape volume, one "File" volume.
>>>
>>> 2 backup jobs, one of /home, and one of the catalog.
>>>
>>> I can pass all the hardware tests etc. here's my process.
>>>
>>> drop the database, reload a clean database. delete the backup file
>>> volumes from the directory. fresh. start the 3 bacula daemons
> using
>>> the conf files below.
>>>
>>> label a volume for the File pool, label a tape for the tape pool.
>>> everything is good.
>>>
>>> run the fd backup, writes to the file. good
>>> run the catalog backup, it writes to file as well.
>>>
>>> I then update the volume to "used" so it can be eligable for
> migration.
>>>
>>> I run the migrate-volume job, and I get:
>>> ###############################################
>>> the following 1 jobIDs will be migrated :1
>>> Migration using JobID=1 job=client1.2006-09-13_11.06.14
>>> Bootstrap records written to /opt/bacula/working/adcd1149-
>>> dir.restore.1.bsr
>>>
>>> the job will require the following
>>> volume Backup00001| Storage(s) File| SD Devices FileStorage
>>> #################################################
>>>
>>> and the job is then waiting for max storage jobs.
>>>
>>> output for status storage=file=
>>>
>>> #################################################
>>>
>>> Running jobs: No Jobs Running
>>> ====
>>> Jobs waiting to reserve a drive:
>>> ====
>>> Terminated Jobs:
>>> jobID level files bytes status finnished name
>>> 1 full 7059 198.9M OK 13-sep-06 11:06 client1
>>> 2 full 1 848.7k OK 13-sep-06 11:08 backupcatatlog
>>> ====
>>> device status:
>>> Device "FileStorage" (/bacvols/volumes) is not open
>>> Device "Drive-1" (/dev/nst0) os mounted with Volume="Tape00001"
>>> Pool="Unknown"
>>> total bytes Read=0 blocks read =0 bytes/block=0
>>> ===
>>> In use volume status
>>> Tape00001 on device "Drive-1" (/dev/nst0)
>>> ====
>>>
>>> so I'm kind of stuck
>>>
>>> I've been fighting it for a day and a half now, and I'm not sure
> what
>>> I'm doing wrong, its probably something obvious, but for some
> reason,
>>> I'm blind to it..
>>
>> Why don't you try to set Maximum Concurrent Jobs = 20 in your bacula-
> dir.conf?
>> I suspect that the Director is having problems running jobs.
>>
>> If the problem persists, you can do two additional things:
>> 1. Show us the output of "status dir" so we can see what the Director
> has
>> running.
>>
>> 2. Try running the director with debug level 100 (i.e. -d100) on the
> command
>> line. That should show us if anything is getting hung up in the
> reservation
>> system.
>>
>> Regards,
>>
>> Kern
>>
>>
>>>
>>> below are my conf files. if there is more information you would
> like,
>>> please let me know, and I'll provide it
>>>
>>> scroll down if you dare...
>>> #
>>> # For Bacula release 1.39.22 (08 Septermber 2006) -- mandrake
> release
>>> #
>>> # You might also want to change the default email address
>>> # from root to your address. See the "mail" and "operator"
>>> # directives in the Messages resource.
>>> #
>>>
>>> Director { # define myself
>>> Name = adcd1149-dir
>>> DIRport = 9101 # where we listen for UA connections
>>> QueryFile = "/opt/bacula/etc/query.sql"
>>> WorkingDirectory = "/opt/bacula/working"
>>> PidDirectory = "/opt/bacula/working"
>>> Maximum Concurrent Jobs = 1
>>> Password = "directorpassword" # Console password
>>> Messages = Daemon
>>> }
>>>
>>> JobDefs {
>>> Name = "DefaultJob"
>>> Type = Backup
>>> Level = Incremental
>>> Client = adcd1149-fd
>>> FileSet = "Full Set"
>>> # Schedule = "WeeklyCycle"
>>> Storage = File
>>> Messages = Standard
>>> Pool = Default
>>> Priority = 10
>>> }
>>>
>>>
>>> #
>>> # Define the main nightly save backup job
>>> # By default, this job will back up to disk in /tmp
>>> Job {
>>> Name = "Client1"
>>> JobDefs = "DefaultJob"
>>> # Write Bootstrap = "/opt/bacula/working/Client1.bsr"
>>> }
>>>
>>> # Backup the catalog database (after the nightly save)
>>> Job {
>>> Name = "BackupCatalog"
>>> JobDefs = "DefaultJob"
>>> Level = Full
>>> FileSet="Catalog"
>>> # Schedule = "WeeklyCycleAfterBackup"
>>> # This creates an ASCII copy of the catalog
>>> RunBeforeJob = "/opt/bacula/etc/make_catalog_backup bacula bacula"
>>> # This deletes the copy of the catalog
>>> RunAfterJob = "/opt/bacula/etc/delete_catalog_backup"
>>> # Write Bootstrap = "/opt/bacula/working/BackupCatalog.bsr"
>>> Priority = 11 # run after main backup
>>> }
>>>
>>> Job {
>>> Name = "Migrate-Volumes"
>>> Type = Migrate
>>> Level = Full
>>> Client = adcd1149-fd
>>> FileSet = "Full Set"
>>> Messages = Standard
>>> Storage = Tape
>>> Pool = Default
>>> Maximum Concurrent Jobs = 4
>>> Selection Type = Volume
>>> Selection Pattern = "Backup00001*"
>>> }
>>>
>>>
>>> #
>>> # Standard Restore template, to be changed by Console program
>>> # Only one such job is needed for all Jobs/Clients/Storage ...
>>> #
>>> Job {
>>> Name = "RestoreFiles"
>>> Type = Restore
>>> Client=adcd1149-fd
>>> FileSet="Full Set"
>>> Storage = File
>>> Pool = Default
>>> Messages = Standard
>>> Where = /tmp/bacula-restores
>>> }
>>>
>>>
>>> # List of files to be backed up
>>> FileSet {
>>> Name = "Full Set"
>>> Include {
>>> Options {
>>> signature = MD5
>>> }
>>>
>>> File = /home
>>> File = /export
>>> File = /export/home
>>> File = "c:/documents and settings/dussaulta/desktop"
>>> }
>>>
>>> #
>>> # If you backup the root directory, the following two excluded
>>> # files can be useful
>>> #
>>> Exclude {
>>> File = /proc
>>> File = /tmp
>>> File = /.journal
>>> File = /.fsck
>>> }
>>> }
>>>
>>> # This is the backup of the catalog
>>> FileSet {
>>> Name = "Catalog"
>>> Include {
>>> Options {
>>> signature = MD5
>>> }
>>> File = /opt/bacula/working/bacula.sql
>>> }
>>> }
>>>
>>> # Client (File Services) to backup
>>> Client {
>>> Name = adcd1149-fd
>>> Address = adcd1149
>>> FDPort = 9102
>>> Catalog = MyCatalog
>>> Password = "fdpassword" # password for FileDaemon
>>> File Retention = 30 days # 30 days
>>> Job Retention = 6 months # six months
>>> AutoPrune = yes # Prune expired Jobs/Files
>>> }
>>>
>>> # Definition of file storage device
>>> Storage {
>>> Name = File
>>> # Do not use "localhost" here
>>> Address = adcd1149 # N.B. Use a fully qualified
> name
>>> here
>>> SDPort = 9103
>>> Password = "sdpassword"
>>> Device = FileStorage
>>> Media Type = File
>>> }
>>> Storage {
>>> Name = Tape
>>> #Do not use "localhost" here
>>> Address = adcd1149 # N.B. Use a fully qualified
> name
>>> here
>>> SDPort = 9103
>>> Password = "sdpassword" # password for Storage daemon
>>> Device = Drive-1 # must be same as Device in
>>> Storage daemon
>>> Media Type = "VXA-2" # must be same as MediaType
> in
>>> Storage daemon
>>> # Autochanger = yes # enable for autochanger
> device
>>> }
>>>
>>> # Generic catalog service
>>> Catalog {
>>> Name = MyCatalog
>>> dbname = bacula; user = bacula; password = ""
>>> }
>>>
>>> #
>>> mailcommand = "/opt/bacula/bin/bsmtp -h localhost -f \"\(Bacula\)
> %
>>> r\" -s \"Bacula: %t %e of %c %l\" %r"
>>> operatorcommand = "/opt/bacula/bin/bsmtp -h localhost -f
> \"\(Bacula\)
>>> %r\" -s \"Bacula: Intervention needed for %j\" %r"
>>> mail = [EMAIL PROTECTED] = all, !skipped
>>> operator = [EMAIL PROTECTED] = mount
>>> console = all, !skipped, !saved
>>> #
>>> # WARNING! the following will create a file that you must cycle from
>>> # time to time as it will grow indefinitely. However, it
> will
>>> # also keep all your messages if they scroll off the
> console.
>>> #
>>> append = "/opt/bacula/working/log" = all, !skipped
>>> }
>>>
>>> # Message delivery for daemon messages (no job).
>>> Messages {
>>> Name = Daemon
>>> mailcommand = "/opt/bacula/bin/bsmtp -h localhost -f \"\(Bacula\)
> %
>>> r\" -s \"Bacula daemon message\" %r"
>>> mail = [EMAIL PROTECTED] = all, !skipped
>>> console = all, !skipped, !saved
>>> append = "/opt/bacula/working/log" = all, !skipped
>>> }
>>>
>>> # Default pool definition
>>> Pool {
>>> Name = Default
>>> Pool Type = Backup
>>> Next Pool = Tape
>>> Recycle = yes # Bacula can automatically
>>> recycle Volumes
>>> AutoPrune = yes # Prune expired volumes
>>> Volume Retention = 365 days # one year
>>> }
>>>
>>> Pool {
>>> Name = Tape
>>> Pool Type = Backup
>>> Recycle = no # Bacula can automatically
> recycle
>>> Volumes
>>> AutoPrune = no # Prune expired volumes
>>> Volume Retention = 1095 days # Three year
>>> }
>>>
>>> #
>>> # Restricted console used by tray-monitor to get the status of the
>>> director
>>> #
>>> Console {
>>> Name = adcd1149-mon
>>> Password = "MLhvSQMlt97xrDgR6Z6eRjxcTEWnoNWJtKssUAW1B79/"
>>> CommandACL = status, .status
>>> }
>>>
> ======================================================================
>>> #
>>> # Default Bacula Storage Daemon Configuration file
>>> #
>>> # For Bacula release 1.39.22 (08 Septermber 2006) -- mandrake
> release
>>> #
>>>
>>> Storage { # definition of myself
>>> Name = adcd1149-sd
>>> SDPort = 9103 # Director's port
>>> WorkingDirectory = "/opt/bacula/working"
>>> Pid Directory = "/opt/bacula/working"
>>> Maximum Concurrent Jobs = 20
>>> }
>>>
>>> #
>>> # List Directors who are permitted to contact Storage daemon
>>> #
>>> Director {
>>> Name = adcd1149-dir
>>> Password = "sdpassword"
>>> }
>>>
>>> #
>>> # Restricted Director, used by tray-monitor to get the
>>> # status of the storage daemon
>>> #
>>> Director {
>>> Name = adcd1149-mon
>>> Password = "mon password"
>>> Monitor = yes
>>> }
>>>
>>> #
>>> # Devices supported by this Storage daemon
>>> # To connect, the Director's bacula-dir.conf must have the
>>> # same Name and MediaType.
>>> #
>>>
>>> Device {
>>> Name = FileStorage
>>> Media Type = File
>>> Archive Device = /bacvols/volumes
>>> LabelMedia = yes; # lets Bacula label unlabeled
>>> media
>>> Random Access = Yes;
>>> AutomaticMount = yes; # when device opened, read it
>>> RemovableMedia = no;
>>> AlwaysOpen = no;
>>> }
>>>
>>>
>>> Device {
>>> Name = Drive-1 #
>>> Drive Index = 0
>>> Media Type = "VXA-2"
>>> Archive Device = /dev/nst0
>>> AutomaticMount = yes; # when device opened, read it
>>> AlwaysOpen = yes;
>>> LabelMedia = yes;
>>> RemovableMedia = yes;
>>> RandomAccess = no;
>>> # AutoChanger = yes
>>> # # Enable the Alert command only if you have the mtx package
> loaded
>>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>> }
>>>
>>> #
>>> # Send all messages to the Director,
>>> # mount messages also are sent to the email address
>>> #
>>> Messages {
>>> Name = Standard
>>> director = adcd1149-dir = all
>>> }
>>> ===================================================================
>>> #
>>> # Default Bacula File Daemon Configuration file
>>> #
>>> # For Bacula release 1.39.22 (08 Septermber 2006) -- mandrake
> release
>>> #
>>> # There is not much to change here except perhaps the
>>> # File daemon Name to
>>> #
>>>
>>> #
>>> # List Directors who are permitted to contact this File daemon
>>> #
>>> Director {
>>> Name = adcd1149-dir
>>> Password = "fdpassword"
>>> }
>>>
>>> #
>>> # Restricted Director, used by tray-monitor to get the
>>> # status of the file daemon
>>> #
>>> Director {
>>> Name = adcd1149-mon
>>> Password = "mon-password"
>>> Monitor = yes
>>> }
>>>
>>> #
>>> # "Global" File daemon configuration specifications
>>> #
>>> FileDaemon { # this is me
>>> Name = adcd1149-fd
>>> FDport = 9102 # where we listen for the director
>>> WorkingDirectory = /opt/bacula/working
>>> Pid Directory = /opt/bacula/working
>>> Maximum Concurrent Jobs = 20
>>> }
>>>
>>> # Send all messages except skipped files back to Director
>>> Messages {
>>> Name = Standard
>>> director = adcd1149-dir = all, !skipped, !restored
>>> }
>>>
>>>
>>>
>>> --
>>>
>>>
>>> --------------------------------------------------------------------
> -----
>>> Using Tomcat but need to do more? Need to support web services,
> security?
>>> Get stuff done quickly with pre-integrated technology to make your
> job
>> easier
>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
>>> http://sel.as-us.falkag.net/sel?
> cmd=lnk&kid=120709&bid=263057&dat=121642
>>> _______________________________________________
>>> Bacula-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>
>>
>>
>
> --
>
>
> ----------------------------------------------------------------------
> ---
> Using Tomcat but need to do more? Need to support web services,
> security?
> Get stuff done quickly with pre-integrated technology to make your
> job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?
> cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Jo Rhett
senior geek
Silicon Valley Colocation
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
