Charlie, I appreciate the clarification on the cross over..... I haven't tried this yet but I do understand that in theory it should work..... Glad to hear confirmation that this does work though..... Thanks!! Spondon
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Charlie Watts Sent: Friday, May 13, 2005 2:29 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Is there a product to simulate a PRI trunk? That is incorrect, you need a crossover cable to go directly between two T1 jacks if the Telco isn't in the middle. A T1/E1 crossover cable swaps pins 1&2 with 4&5. For PRI, configure one end as pri_net, and the other end as pri_cpe. Works just fine. Lots and lots of folks do this. Channel banks, legacy phone systems, multiple asterisk systems, modem servers. Dey, Spondon, ALABS wrote: > Rob, > That should work.....without a crossover though.... > If you have an extra card and machine to dedicate for that purpose > that should suffice. > In theory it should work....i have been tempted to try it but > haven't.... > let me know the outcome if you do try it. > Thanks!! > Spondon > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Robert > Goodyear > Sent: Friday, May 13, 2005 2:06 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] Is there a product to simulate a PRI trunk? > > > Does anyone know of a way to simulate the signaling of a PRI trunk > for testing/setup purposes? I realize this may be a rather naive > question, but I was wondering if you could take a TE110, for example, > and using a crossover cable (or not?) and some means of emulating the > NI2 signaling protocol connect it to another TE110 on another machine > to test and verify an installation before the telco comes out to > provision our new trunks. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
