Robert, For more protocol focussed testing you can chack out the T-berd product line: http://www.acterna.com/global/products/descriptions/TB-224/index.html You may know this already but I will pass it on in the spirit of sharing information.... They have other models ....the product link above is probably decent for what you are looking for..... Thanks!! Spondon
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Robert Goodyear Sent: Friday, May 13, 2005 4:01 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Is there a product to simulate a PRI trunk? On May 13, 2005, at 12:39 PM, Chris A. Icide wrote: > You should note that while this "works" technically, it won't catch > any issues that you may experience when connecting to other PRI > switches. > > In other words, two asterisk servers connected back to back with a T1 > cross-over cable won't tell you that Asterisk's NFAS code doesn't work > with Lucent 5ESS switches, or that Sangoma's code pre-firmware v1.1 > and pre-driver beta6 versions won't bring up the D channels when > connected with certain switches. Everything will work between two > asterisk boxes perfectly. > Right. Which is why I wanted to figure out if there was a way to emulate the particular signaling protocol; in my instance, NI2, to ensure I'm doing all the right things on my end based on what I tell the simulated telco end to impersonate. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
