Yeah, it is set to the right signalling..
On Thu, 6 Jan 2005 22:47:45 +0000 (GMT), Chris Glover <[EMAIL PROTECTED]> wrote: > On Thu, 6 Jan 2005, John Middleton wrote: > > > Ive just installed a TDM4000P with 4 fxos. The zaptel config is fine, > > zttest comes back with configured. If i call a line when zttest it > > shows on the display,and then goes when the line drops. > > > > In * when a call comes in, it follows my dialplan and answers the call > > according to the log, but IT DOESN'T actually pick up the call, i.e. > > it continues ringing. > > > > I'm using KS signalling, and connected to the UK phone system. > > > > Anyone seen this before, or give me some pointers, or suggest what I > > should post for diagnostic purposes? > > > > For the FXO ports on the card, you need to use FXS signalling. FXS_KS in > your case. Confused? you should be :-) > > HTH > > Chris > > -- > Chris > ---------------------------------- > E Mail: [EMAIL PROTECTED] > SIP: [EMAIL PROTECTED] > IAXTEL: 17003366726 > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
