What I am confused about the most is this section in /etc/zaptel.conf: # Next come the dynamic span definitions, in the form: # dynamic=<driver>,<address>,<numchans>,<timing> # # Where <driver> is the name of the driver (e.g. eth), <address> is the # driver specific address (like a MAC for eth), <numchans> is the number # of channels, and <timing> is a timing priority, like for a normal span. # use "0" to not use this as a timing source, or prioritize them as # primary, secondard, etc. Note that you MUST have a REAL zaptel device # if you are not using external timing. # # dynamic=eth,eth0/00:02:b3:35:43:9c,24,0
The wiki doesn't say anything about this dynamic stuff. Any clues out there? Or can I just ignore it? Thanks, Matthew ----- Original Message ----- From: "Listas" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Thursday, December 23, 2004 10:37 AM Subject: Re: [Asterisk-Users] Fw: [digium.com #12961] T100P as bandwidth > I tried to configure a TE110XP using HDLC (mainly to see if it worked) I > called the guys at Digium because HDLC support is not natively compiled, > they told me that HDLC was not covered in the free support provided with the > card, I had to rebuildl the kernel but as I had not that much time available > to play with the Cisco swith which was the E1 connection I had to end the > test there, however there is some info in: > > http://www.voip-info.org/tiki-index.php?page=Asterisk%20Data%20Configuration > > I also read some of the posts in the lists like > http://lists.digium.com/pipermail/asterisk-users/2004-May/047704.html > > http://lists.digium.com/pipermail/asterisk-dev/2003-May/000545.html > > hope this helps... > > bye, > M. > ----- Original Message ----- > From: "Matthew Boehm" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, December 23, 2004 12:37 PM > Subject: [Asterisk-Users] Fw: [digium.com #12961] T100P as bandwidth > > > > Even though they make the cards and advertise that they support data > modes, > > digium won't support data mode on the $500 card they sold to me, so I must > > turn to the list. > > > > Has anyone configured a T100P to use a T1 strictly as bandwidth? Is there > a > > HOWTO somewhere? Wiki has nothing I could find. I've got plently of public > > IPs I can assign to it but don't know how. > > > > Thanks, > > Matthew > > > > ----- Original Message ----- > > From: "Matthew A. Nicholson via RT" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, December 23, 2004 10:38 AM > > Subject: [digium.com #12961] T100P as bandwidth > > > > > > > Yes the hardware, and our drivers suppport both voice and data modes, > > > but because of the nature of the configuration we do not support it. > > > Configuring one of our T1 cards for data mode often requires a kernel > > > recompile, and extensive network device configuration. Here at Digium > > > our speciality is telephony not networking, this is why we do not > > > support the data mode of our hardware. > > > > > > > [EMAIL PROTECTED] - Wed Dec 22 17:16:29 2004]: > > > > > > > > I dont mean to sound like a jerk but it says quite clearly on your > > website > > > > (http://www.digium.com/index.php?menu=wildcard_t100p) that this card > > does > > > > both Voice and Data. Why would you guys tell me that the card supports > > > data > > > > but not support data config yourself? They are your cards right? > > > > > > > > Thanks, > > > > Matthew > > > > > > > > > > -- > > > Matthew A. Nicholson > > > Digium > > > > _______________________________________________ > > Asterisk-Users mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
