On Mon, 2004-10-11 at 11:45 -0400, Cirelle Enterprises wrote: > Has anybody had any experience connecting the t100p to > a verizon smart jack. > > I've been told the t100p uses an RJ48 but not the revision > (i.e. C, S, X ) > > I've created wires (RJ48C x-over) but no green light on the t100p
> i've created wire (RJ48S) no green light > (only because the HyperEdge Smart Jack says this is default > but can't confirm this to be true in my case). > Standard RJ45 ether cable gets ligts on the card and smart jack > but no signal Then you should have noticed then that no cross over cable is necessary to a smart jack. Only time to use a cross over cable is when connecting 2 end devices together. > zttool indicates OK for both the t100p and the tdm04b cards (no alarms) > I can ping the t100p but no further with the standard ether cable Are you doing data or voice on the T100P? -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
