Martin Pycko wrote:
Well first of all if you're outside of US or callprogress-supported zones then you can use only busydetect. And that will only work if after the remote hangup your telco gives the fast-busy or any type of busy. You can tweak the duration of tone/pause and increase the count and it *will* work properly.
regards Martin
One thing to watch for here is RX gain if busydetect does not seem to be working after trying all the combinations.
I had a 2 x X101P setup which busydetected perfectly - TX and RX gains were at the default levels.
The X101Ps were replaced by a TDM card with 4 x FXO modules and with no config changes, busydetect stopped working. After incrementing in 1dB steps, an RX gain of 3.0 brought back reliable busydetect.
I look forward to Rich Adamsons forthcoming writeup on setting up the gain distribution in an Asterisk system, to get everything working optimally.
Regards,
Richard
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
