cvs HEAD did infact fix the ringing problem. Thanks Eric! I have another question for all you T1 buffs out there. The T1 I am working with goes into our local phone switch (Excel switch). Currently we are using E & M Wink signaling. The problem is we cannot set callerid on the outbound side. My minimal understanding is that if we had a PRI, I could set the callerID. Unfortunately PRI is one signaling type they cannot do (not have expensive PRI card in switch).
So, my question is what other signaling types CAN I set the callerID outbound? My local switch techs cannot seem to answer that question. They just always use E & M for everything. But if I can ask them to specifically try a certain signaling type (such as Feature Group D) or one of the others in the t100p supported list, I could probably get them to change the signaling type on my trunk. Do any signaling types other than PRI support passing outbound callerID? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
