On Monday 12 April 2004 01:34 am, Dave Cotton wrote: > On Mon, 2004-04-12 at 03:39, Anon wrote: > > On Sunday 11 April 2004 07:18 pm, Todd Lieberman wrote: > > > do a cat /proc/interupts > > > > > > your should see your hardware showup. > > > > OK... > > cat /proc/interrupts > > CPU0 > > 0: 494600 XT-PIC timer > > 1: 5588 XT-PIC keyboard > > 2: 0 XT-PIC cascade > > 8: 1 XT-PIC rtc > > 9: 266296 XT-PIC ehci_hcd, es1371 > > 10: 4892925 XT-PIC usb-uhci, wctdm > > 11: 4936093 XT-PIC ide1, usb-uhci, usb-uhci, wcfxo, eth0 > > 12: 108609 XT-PIC PS/2 Mouse > > 14: 22056 XT-PIC ide2 > > 15: 83 XT-PIC ide3 > > NMI: 0 > > LOC: 494575 > > ERR: 1278 > > MIS: 0 > > > > I don't see wcfxs. I did "modprobe wcfxs" and "cat /proc/interrupts" > > still shows the same output. What do you think is causing to not show on > > the list above? > > It is there it's hiding under the name of wctdm, but at the moment I'd > say that's the least of your problems. Interrupts 10 and 11 both have > other things sharing the interrupts with Digium cards, most people will > tell you that that's not good. Interrupt 11 looks horrible. Having been > through this hell recently I can only suggest repositioning cards in > different slots. Interestingly where is ide0 and do you really need > ide2/3?
I thought about all those problems you mentioned, and it turns out I have an older version of the TDM400P that had some kind of defect, and needed to be sent back to Digium. While on the topic of Digium support, I would like to say that I am extremely impressed with the unusually high quality service at Digium. To my suprise and amazement, Digium shipped out a card before I sent mine back. Truely _first class_ service. BTW - I do use IDE 2/3. I do not know why the BIOS loads up the IRQ's the way it does. Yer, there does not seem to be any IRQ-related problems. Thanks for the help and ideas. :) Anon _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
