do a cat /proc/interupts your should see your hardware showup.
TL -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Anon Sent: Sunday, April 11, 2004 8:47 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Booting error - Unable to specify channel 2: No such device On Sunday 11 April 2004 05:55 pm, Todd Lieberman wrote: > modprobe your zaptel hardare... The modules are automatically loaded at boot time. To make sure I had the modules loaded, I did "lsmod", and the Asterisk related modules are listed as: wcusb 17600 0 (unused) wcfxs 54944 0 (unused) wcfxo 8992 0 (unused) zaptel 182752 0 [wcusb wcfxs wcfxo] Also, one of the channels on the TDM400P is lit. I don't understand why wcusb is getting loaded because I do not have an Asterisk USB device. Could that be part of the problem? BTW - I forgot to include in my original message the output of ztcgf: Zaptel Configuration ====================== Channel map: Channel 01: FXS Loopstart (Default) (Slaves: 01) Channel 02: FXO Loopstart (Default) (Slaves: 02) 2 channels configured. Any other ideas? Thanks, Anon _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
