what is your easy start up guide? ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, March 09, 2004 12:16 PM Subject: [Asterisk-Users] From 0 to PBX in 2 hours
> > Hi everyone, > > As an newbie in * and knowing how hard Linux can be for starters (more if > you come from the world of MSwindows.), I triyed a way to teach my > co-workers how to deploy fast and in less than two hours a small but > perfect working PBX. > > I used the following equipment: > > 1 Clarent CPG 101 (A.K.A. D-link 104s) 4 FXS ports > 1 PC Celeron 500Mhz 128MB Ram > > The following software: > 1 Mepis Installation CD, > > and a cable Internet link. > > Booted up the computer with the Mepis (Debian based) CD, installed Linux in > the Hard disk, 15 minutes or less. Updated the firmware and the boot prom > to versions 3.0B35-C and 3.0B14-C in the Clarents respectively, runned > apt-get install asterisk, and then begun to figure out how to configure the > mgcp gateways. So far whe have deployed in two days 5 locations and > starting to connect Barquisimeto, Venezuela, with Buenos Aires, Argentina. > > Hope that helps someone and encourage others to start in this great world > of telecomunications > > AMG > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
