Hi everyone, As an newbie in * and knowing how hard Linux can be for starters (more if you come from the world of MSwindows.), I triyed a way to teach my co-workers how to deploy fast and in less than two hours a small but perfect working PBX.
I used the following equipment: 1 Clarent CPG 101 (A.K.A. D-link 104s) 4 FXS ports 1 PC Celeron 500Mhz 128MB Ram The following software: 1 Mepis Installation CD, and a cable Internet link. Booted up the computer with the Mepis (Debian based) CD, installed Linux in the Hard disk, 15 minutes or less. Updated the firmware and the boot prom to versions 3.0B35-C and 3.0B14-C in the Clarents respectively, runned apt-get install asterisk, and then begun to figure out how to configure the mgcp gateways. So far whe have deployed in two days 5 locations and starting to connect Barquisimeto, Venezuela, with Buenos Aires, Argentina. Hope that helps someone and encourage others to start in this great world of telecomunications AMG _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
