I finally got an answer on IRC, turns out the problem was callprogress=yes (a.k.a. screwupmycalls=yes). Changing it to no and dropping the r seemed to work. I'd like the feature to work properly, but it's more important that I'm able to actually make calls :)
I *am* now stuck with a long pause before I hear the outgoing ringing though. Not sure if there's anything I can do to tackle that one. On 11 February 2013 21:32, Matthew Fredrickson <[email protected]> wrote: > Hey, > > Just quickly glanced over your data... one problem you have is that you're > passing the 'r' flag in your Dial() statement in extensions.conf. That > would definitely cause you to have never ending ringback from the analog > line (since answer supervision is often not present). You might try > removing that and retry your outbound call test. > > Hope that helps a bit. > > Matthew Fredrickson > Digium, Inc. > > > On 2/11/13 10:54 AM, Kevin Wright wrote: > >> >> I forgot to add, cat /proc/dahdi/* yields: >> >> Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) >> >> 1 WCTDM/4/0 FXSKS (In use) (EC: MG2 - INACTIVE) >> 2 WCTDM/4/1 FXOKS (EC: MG2 - INACTIVE) >> 3 WCTDM/4/2 Reserved >> 4 WCTDM/4/3 Reserved >> >> >> I'm not sure if that (in use) is correct when I'm not actively in a call. >> >> This is a very sensitive setup, as a home installation it absolutely >> *must* pass the gruelling "wife test", so I'm keen to see it up and >> running properly :) >> >> >> On 11 February 2013 16:50, Kevin Wright <[email protected] >> <mailto:kev.lee.wright@gmail.**com <[email protected]>>> wrote: >> >> >> I'm attempting to place an outgoing call over POTS/DAHDI, it dials >> without problem but the remote answer isn't tried. >> >> So far I've attempted: >> >> * Searching on google >> * Enabling full and verbose logging (including the debug option of >> >> the DAHDI module) - showing NO event at the time I answer on the >> remote phone a.k.a "my mobile" >> * Using another phone on the same line - it works >> * Receiving a call on that line - no problem >> * Logging DTMF - it shows digits dialled on my mobile, after I've >> >> answered, even whilst it seems to still be ringing locally >> * Looking on the wiki >> * Asking on IRC >> >> >> So far, I've found nothing that helps. >> >> A sample log output is here: http://pastebin.com/cprZSy9i >> And my chan_dahdi.conf: http://pastebin.com/L7mBJ66Y >> And dahdi system.conf: http://pastebin.com/6UQPVC9x >> also in modprobe.d/dahdi.conf: http://pastebin.com/5ZqtcZdj >> >> *any* advice/suggestions at this point would be very much appreciated! >> >> >> >>
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
