I forgot to add, cat /proc/dahdi/* yields: Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
1 WCTDM/4/0 FXSKS (In use) (EC: MG2 - INACTIVE) 2 WCTDM/4/1 FXOKS (EC: MG2 - INACTIVE) 3 WCTDM/4/2 Reserved 4 WCTDM/4/3 Reserved I'm not sure if that (in use) is correct when I'm not actively in a call. This is a very sensitive setup, as a home installation it absolutely *must* pass the gruelling "wife test", so I'm keen to see it up and running properly :) On 11 February 2013 16:50, Kevin Wright <[email protected]> wrote: > > I'm attempting to place an outgoing call over POTS/DAHDI, it dials without > problem but the remote answer isn't tried. > > So far I've attempted: > > - Searching on google > - Enabling full and verbose logging (including the debug option of the > DAHDI module) - showing NO event at the time I answer on the remote phone > a.k.a "my mobile" > - Using another phone on the same line - it works > - Receiving a call on that line - no problem > - Logging DTMF - it shows digits dialled on my mobile, after I've > answered, even whilst it seems to still be ringing locally > - Looking on the wiki > - Asking on IRC > > So far, I've found nothing that helps. > > A sample log output is here: http://pastebin.com/cprZSy9i > And my chan_dahdi.conf: http://pastebin.com/L7mBJ66Y > And dahdi system.conf: http://pastebin.com/6UQPVC9x > also in modprobe.d/dahdi.conf: http://pastebin.com/5ZqtcZdj > > *any* advice/suggestions at this point would be very much appreciated! > > > >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
