On 09-05-12 19:54, khalid touati wrote: > Thank you for your answer, I think I posted dhadi version and so but > let me add more details and recap them below: > > We are using asterisk 1.8.12.0 with dahdi 2.6.0, on CentOS 6.2. it's a > digium card 1HA8-0400BLF > > output of dahdi_hardware: pci:0000:04:08.0 wctdm24xxp+ d161:8008 > HB8-0000 > > From BT side: it is called by BT a "system access" ISDN2 BRI (per BT NT > mode and signaling as PTP) > > chan_dahdi.conf > > ; Span 1: WCBRI/0/0 "HB8-0000" (MASTER) AMI/CCS > group=1,11 > context= mainmenu > switchtype = euroisdn > signalling = bri_cpe > channel => 1-2 > context = default > group = 63 > > ; Span 2: WCBRI/0/1 "HB8-0000" AMI/CCS > group=1,12 > context=mainmenu > switchtype = euroisdn > signalling = bri_cpe > channel => 4-5 > context = default > group = 63 > > ; Span 3: WCBRI/0/2 "HB8-0000" AMI/CCS > group=1,13 > context=mainmenu > switchtype = euroisdn > signalling = bri_cpe > channel => 7-8 > context = default > group = 63 > > ; Span 4: WCBRI/0/3 "HB8-0000" AMI/CCS > group=1,14 > context=mainmenu > switchtype = euroisdn > signalling = bri_cpe > channel => 10-11 > context = default > group = 63 > > the error when placing a call : *Span: 4 TEI=0 MDL-ERROR (J): N(R) error > in state 7(Multi-frame established) > * > Thank you!!
You did not provide system.conf. Do you have something like this (may have errors, I did not check): loadzone = uk defaultzone = uk span => 1,1,0,ccs,ami,te,term bchan = 1,2 hardhdlc = 3 span => 2,2,0,ccs,ami,te,term bchan = 4,5 hardhdlc = 6 span => 3,3,0,ccs,ami,te,term bchan = 7,8 hardhdlc = 9 span => 4,4,0,ccs,ami,te,term bchan = 10,11 hardhdlc = 12 Then as root: modprobe wctdm23xxp And as root: dahdi_cfg -vvv And check if all is well (green leds, happy messages in /var/log/messages, etc.). Then in chan_dahdi.conf use something like: ;BRI Module group = 1 signalling = bri_cpe context = incoming channel => 1,2,4,5,7,8,10,11 Your chan_dahdi.conf has "group" and "context" multiple times and that does not seem right (admittedly it's been ages since I setup a Digium card). Hope this helps. If not follow the installation manual step for step or call Digium support. http://docs.digium.com/H8/hx8_series_manual.pdf Regards, Patrick -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
