On 03/07/2011 08:22 PM, Brian Henning wrote: > > I have just installed an Asterisk server with a Digium TDM410P card with 3 > FXO modules (no module in the 4th slot). > > It's lived on two different machines (a test machine, which had Linux kernel > 2.6.28, and a new dedicated machine which has Linux kernel 2.6.32). > > On the test machine (2.6.28), I used the Zaptel drivers. Once the kernel > modules were loaded, the lights on the TDM410P came on green for the > installed FXO modules. > > On the new server, the Zaptel drivers wouldn't build so I switched over to > dahdi. Everything seems to be working, EXCEPT there are no lights on the > TDM410P! I guess I can ignore that the lights aren't lit up, because it > seems to be functioning as expected (I can dial out and receive incoming > calls)...but it's disconcerting that the lights aren't on. Yes, the Molex > power connector is connected (although I think that's only needed by FXS > modules). > > I've tried google searches but haven't found anything mentioning this odd > behavior. Is this expected? >
Brian, I haven't run it, but looking through the code this appears to be a regression I added in 2.4.1 / current trunk (introduced in r9720 [1]). I've opened issue 18939 and attached some patches if you want to try them. That way I can add your reported by / tested-by information if you would like. [1] http://svn.asterisk.org/view/dahdi?view=revision&revision=9720 [2] https://issues.asterisk.org/view.php?id=18939 Thanks, -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
