On Wed, 2010-11-10 at 10:51 -0500, Miguel Molina wrote: > El 10/11/10 10:31, Martin Spinassi escribió: > > On Wed, 2010-11-10 at 17:10 +0200, Tzafrir Cohen wrote: > >> On Wed, Nov 10, 2010 at 11:42:18AM -0300, Martin Spinassi wrote: > >>> Hi list, > >>> > >>> I'm trying to setup an asterisk 1.8.0 with MFC/R2, but I'm having these > >>> error messages loading chan_dahdi: > >>> > >>>> module load chan_dahdi.so > >>> ERROR[9241]: chan_dahdi.c:11848 mkintf: Signalling requested on channel > >>> 1 is MFC/R2 but line is in ISDN PRI signalling > >> That is: "You requested [in chan_dahdi.conf] MFC/R2 signalling, but the > >> channel has [applied from /etc/dahdi/system.conf] PRI signalling. > >> > >> You should probably have in /etc/dahdi/system.conf something along the > >> lines of: > >> > >> # Not sure about crc4 > >> span=1,1,0,cas,hdb3,crc4 > >> cas=1-15,17-31,1101 > >> dchan=16 > >> > >> # also be sure to set echocan, tonezone, and such > >> > > > > Thank you so much Tzafrir for your response. > > > > After reading your post, it gets a bit more clearer, but can't figure > > out how to solve it. > > > > This is my /etc/dahdi/system.con > > > > span = 1,1,0,ccs,hdb3 > > bchan = 1-15,17-31 > > dchan = 16 > > echocanceller = mg2,1-240 > > loadzone = ar > > defaultzone = ar > > > > And this my /etc/asterisk/chan_dahdi.conf > > > > [channels] > > echocanceller=yes > > cancallforward=yes > > echocancelwhenbridged=yes > > context=entrantes-pstn > > callgroup=1 > > pickupgroup=1 > > signalling=mfcr2 > > mfcr2_variant=ar > > mfcr2_max_ani=10 > > mfcr2_max_dnis=14 > > mfcr2_category=national_subscriber > > mfcr2_logdir=span1 > > mfcr2_call_files=yes > > mfcr2_logging=all > > channel => 1-15 > > channel => 17-31 > > > > Does they make sense to you? I'm kind of messed up after review them > > hundreds of times in 48 hours. > > > > Cheers, > > > > Martin > > > > > There you are... your system.conf has: > > span = 1,1,0,ccs,hdb3 > > MFC/R2 uses CAS signalling, not CCS like PRI links, so you can try what > Tzafrir suggested for your DAHDI system.conf file. I found a similar > MFC/R2 configuration in this post: > > http://lists.digium.com/pipermail/asterisk-r2/2010-April/001760.html > > Hope it helps. > > Cheers, > > -- > Ing. Miguel Molina > Grupo de Tecnología > Millenium Phone Center > >
Tzafir, Shaun and Miguel: Thanks so much for your help! The config that Shaun sent worked perfectly, and it's the same that Miguel pointed on his mail. As I have no way to show you how happy I am finally solving this, if you ever visit Buenos Aires, I promise you guys I'll buy as much beer/coffee as you can take :-D Best regards and thank you once again! Martin -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
