Hi list, I'm trying to setup an asterisk 1.8.0 with MFC/R2, but I'm having these error messages loading chan_dahdi:
> module load chan_dahdi.so ERROR[9241]: chan_dahdi.c:11848 mkintf: Signalling requested on channel 1 is MFC/R2 but line is in ISDN PRI signalling ERROR[9241]: chan_dahdi.c:16180 build_channels: Unable to register channel '1-15' I got the config in /etc/asterisk/chan_dahdi.conf with the correct signalling: signalling=mfcr2 mfcr2_variant=ar Why asterisk detects it as ISDN PRI? Is there any way to force it to use MFC/R2? Am I missing something? Any tip or link to documentation is really appreciated. Here goes some info about what I have: # dahdi_scan [1] active=yes alarms=OK description=Wildcard TE121 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE121 (VPMADT032) location=PCI Bus 37 Slot 09 basechan=1 totchans=31 irq=32 type=digital-E1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI,HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS Asterisk version: 1.8.0 Dahdi version: dahdi-linux-complete-2.4.0+2.4.0 libpri version: libpri-1.4.11.4 openr2 version: openr2-1.2.0 My location: Argentina Again, if you have any tip, I'll really thank you it. I've been scratching my head with this for two long days.. Cheers, MartÃn -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
