I tried both featd and em in zapata.conf, to no avail. I restarted in between all changes. Is it possible to signal the DPO ports on the 750 with fxo_ls or fxo_ks?
This is the last piece to my DID puzzle. Anyone else with experience on this oddball config? Thanks, -sb -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of James Sharp Sent: Friday, January 30, 2004 11:52 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Adtran 750 DID question. > Hello All, > > I've mostly solved my DID problem from a few days ago. Apparenly the > lines weren't configured properly. Now heres the next question. 12 E&M > wink lines from telco. I have them all plugging into an Adtran 750 with > FXS cards. The Adtran ports are configured DPO. How do I signal this > from Zaptel. I have them setup E&M in zaptel.conf and EM_W in > zapata.conf. They work, however, no DNIS info is being passed. Do I need > to signal these something different like loopstart or kewlstart, so the > DNIS info gets passed? I watch the Tx/Rx bits from zttool, and everything > looks okay coming from the Adtran. It looks like asterisk isn't winking > properly. I had a similar problem. I ended up setting the trunks to either just plain em or featd (I don't remember). I chased through the chan_zap source code and decided (maybe incorrectly) that asterisk doesn't look for DNIS digits in E&M Wink mode. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
