Hello All, I've mostly solved my DID problem from a few days ago. Apparenly the lines weren't configured properly. Now heres the next question. 12 E&M wink lines from telco. I have them all plugging into an Adtran 750 with FXS cards. The Adtran ports are configured DPO. How do I signal this from Zaptel. I have them setup E&M in zaptel.conf and EM_W in zapata.conf. They work, however, no DNIS info is being passed. Do I need to signal these something different like loopstart or kewlstart, so the DNIS info gets passed? I watch the Tx/Rx bits from zttool, and everything looks okay coming from the Adtran. It looks like asterisk isn't winking properly.
When I had the lines misconfigured for fxs_ls the DNIS info was passing fine. I'm running zaptel-0.8.0 libpri-0.5.1 And asterisk CVS from 12/23/2003 RedHat 8.0 Dual 2.4 Xeon Processors (hyperthreading disabled) 2Gig Memory Any help would be greatly appreciated. Regards, -sb _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
