In your account settings (sip.conf) for the PAP2T device, do you have reinvite enabled for one or both.. the SIP provider and/or the PAP2T device ? ________________________________ From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Shaun Wingrin [EMAIL PROTECTED] Sent: Sunday, May 25, 2008 3:15 PM To: [email protected] Subject: [asterisk-users] One way Speech issue - only in PAP2T to SIP device attached to Asterisk but not PAP2T to Voip service provider
Shaun schrieb: > Hi All, > > This is puzzling me greatly. > > The setup: PAP2T over ADSL registers to Asterisk 1.4?using SIP. Attached to > Asterisk are SIP clients. Codec throughout G729 (only have 1 license on > Asterisk server loaded though). When calling the SIP clients from PAP2T I > can't hear them but they can hear me. > > If I call from PAP2T through Asterisk using?IAX2 to a VOIP provider there is > speach in both directions! > > Any suggestions? > > Thanks Shaun > check your firewall/nat settings. If your setup will work for around 5 minutes after you have rebooted the pap2t then you have to active the nat keep alive and nat mapping service in the pap2t. best regards steve smith DEAR STEVE, THANKS, I DID CHECK THEM AND THEY NEEDED TO BE ACTIVATED. THIS DOES NOT SOLVE THE PROBLE. STILL ONE WAY SPEECH WHEN CALLING PAP2T -->ASTERISK-->SIP DEVICE ATTACHED. HOWEVER PAP2T-->ASTERISK-->SIP PROVIDER WORKS FINE AS WELL AS SIP DEVICE ATTACHED-->ASTERISK-->SIP RPOVIDER. ANY SUGGESTIOPS WELCOME
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
