Shaun schrieb:
> Hi All,
>
> This is puzzling me greatly.
>
> The setup: PAP2T over ADSL registers to Asterisk 1.4?using SIP. Attached to
> Asterisk are SIP clients. Codec throughout G729 (only have 1 license on
> Asterisk server loaded though). When calling the SIP clients from PAP2T I
> can't hear them but they can hear me.
>
> If I call from PAP2T through Asterisk using?IAX2 to a VOIP provider there is
> speach in both directions!
>
> Any suggestions?
>
> Thanks Shaun
>
check your firewall/nat settings.
If your setup will work for around 5 minutes after you have rebooted the
pap2t then you have to active the nat keep alive and nat mapping service
in the pap2t.
best regards
steve smith
DEAR STEVE,
THANKS, I DID CHECK THEM AND THEY NEEDED TO BE ACTIVATED. THIS DOES NOT SOLVE
THE PROBLE. STILL ONE WAY SPEECH WHEN CALLING PAP2T -->ASTERISK-->SIP DEVICE
ATTACHED. HOWEVER PAP2T-->ASTERISK-->SIP PROVIDER WORKS FINE AS WELL AS SIP
DEVICE ATTACHED-->ASTERISK-->SIP RPOVIDER.
ANY SUGGESTIOPS WELCOME
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
