Does it show up in 'lspci'? On Mon, 24 Dec 2007, Bob Smither wrote:
> I am out of things to try on getting an X100P card to work. > > I have a P4 system with CentOS 5.1 installed (network install). After > adding required packages I compiled (apparently successful) and > installed Zaptel in anticipation of installing Asterisk. > > I simply cannot get the X100P card to be recognized. I have tried bios > setting of PnPOS no and PnPOS yes, tried the card in different slots, > disabled all the unused motherboard devices to free up interrupts, etc. > > The card works flawlessly in a CentOS 4.4 install on an old K6-2 > motherboard. > > If I put an ethernet card in a PCI slot (in addition to the one on the > motherboard), it is recognized and configured during boot so I assume > the interrupt hardware is working on the mother board. > > I would really appreciate any suggestions of what I could try here. > > Thanks! > -- > Bob Smither <[EMAIL PROTECTED]> > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : +1-678-954-0670 Direct : +1-678-954-0671 _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
