I am out of things to try on getting an X100P card to work. I have a P4 system with CentOS 5.1 installed (network install). After adding required packages I compiled (apparently successful) and installed Zaptel in anticipation of installing Asterisk.
I simply cannot get the X100P card to be recognized. I have tried bios setting of PnPOS no and PnPOS yes, tried the card in different slots, disabled all the unused motherboard devices to free up interrupts, etc. The card works flawlessly in a CentOS 4.4 install on an old K6-2 motherboard. If I put an ethernet card in a PCI slot (in addition to the one on the motherboard), it is recognized and configured during boot so I assume the interrupt hardware is working on the mother board. I would really appreciate any suggestions of what I could try here. Thanks! -- Bob Smither <[EMAIL PROTECTED]> _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
