Chris Boczko wrote: > Hello List, Hello Chris,
> > Im just dipping my feet into the asterisk world, and im having major > fxo problems > > Im running Asterisk (from svn) + libpri (from svn) + asterisk-addons > (from svn) + asterisk gui (svn 1.4 branch) + zaptel (svn 1.4) on a > Debian Etch box, with 1gb ram, running all of the services for my home > server (web / db / music server etc), and i would like to run my PSTN > line from Kingston Comms, but i can't get this box the recoginsie this > line! > > The X100p is a cheap clone i got off ebay for a tenner, so im not > expecting much, i know they have echo issues, but im going to upgrade > to a SPA3012 / TDM400B when i have the cash. I bought a cheap clone from eBay in the US for about £15 inc. postage that has two sockets on the back. One for the PSTN line and one as a passthrough for a phone. The board is from VOX I think and looks to be quite a recent design - all surface mount components and not that many... It's a low-profile card and slot connector as I am running asterisk and other apps on a low power VIA 1.2Ghz CN700 board - just 7W! > Ztcfg -vv reports > > orange:~# ztcfg -vv > > Zaptel Version: SVN-branch-1.4-r3374 > Echo Canceller: MG2 > Configuration > ====================== > > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > 1 channels to configure. > That looks fine: Mine says basically the same thing (extra lines removed). # ztcfg -vv Zaptel Version: 1.4.6 Echo Canceller: OSLEC Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels to configure. > and my zaptel.conf file contains > > /etc/zaptel.conf > fxsks=1 > loadzone=uk > defaultzone=uk Here's mine: loadzone=uk defaultzone=uk fxsks=1 > but zap show status in the command line shows > > orange*CLI> zap show status > Description Alarms IRQ bpviol CRC4 > Fra Codi Options LBO > Wildcard X100P Board 1 OK 0 0 0 > CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) > orange*CLI> Mine: Description Alarms IRQ bpviol CRC4 Wildcard X100P Board 1 OK 0 0 0 > Does anyone have any ideas on how to get this line to work, ive > followed every howto i can find, and google seems to be comming up > short, as far as i can see, ztcfg should report the card as > configured, but it isn't, and ive no idea why. Your settings look fine to me. My zapata.conf ; Zapata telephony interface ; ; Configuration file [channels] ;Hardware defaults for the x100p card usecallerid=yes hidecallerid=no ;callwaiting=no threewaycalling=yes ;usedistinctiveringdetection=yes transfer=yes ;usecallingpres=yes ;callwaitingcallerid=yes ;cancallforward=yes ;callreturn=yes echocancel=yes echotrainingwhenbridged=no ;echotraining=400 ;rxwink=300 ; Atlas seems to use long (250ms) winks cidsignalling=v23 ; Added for UK CLI detection ;cidstart=usehist ; After patching the driver from here : ; http://www.lusyn.com/resources/asterisk/usehist.htm callerid=asreceived ; propagate the CID received from BT rxgain=6.0 txgain=6.0 ;define channel context=main_menu language=en signalling=fxs_ks channel => 1 ;Our x100p You don't show how your zapata.conf is set up and whether you have the context and channel defined correctly. (Note quite a lot of the options in mine are commented out - still playing around to see what things do) In my extension.conf I have a context called "main_menu" that presents a fairly simple Automated Attendant system. Can you make outgoing calls? What happens if you set debugging to a reasonably high number and you try to ring in? You should at least see ringing detection etc... In the asterisk console you should have something like this.: vimes*CLI> zap show channels Chan Extension Context Language MOH Interpret pseudo main_menu en default 1 main_menu en default If/when you do get the card working, I'd recommend you change your echo canceller to OSLEC. It works a treat! I have written a few articles about setting it up on my blog: as below. -- The way out is open! http://www.theopensourcerer.com _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
