Hello List, Thanks for the replies...currently
Still doing the same after adding channel=1 to the /etc/zaptel.conf my zapata.conf looks like orange:~# more /etc/asterisk/zapata.conf [trunkgroups] [channels] usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=yes transfer=yes echocancel=yes echotraining=yes context=incoming signaling=fxs_ks group=1 channel=>1 orange:~# Im getting pretty sure now that its the card, i borrowed a TDM400B (the 3port model) from a friend, and it came up just fine (with a quick change to zaptel.conf and zapata.conf)....im thinking..... duff card Ive got a linksys SPA-3102 on order to replace this card... but i would still like to confirm if it is the card thats duff or something with my config, more of a "geeky pride" excercise than anything else. Cheers Chris On 11/12/2007, Drew Gibson <[EMAIL PROTECTED]> wrote: > Chris Boczko wrote: > > Hello List, > > > > Im just dipping my feet into the asterisk world, and im having major > > fxo problems > > > > Im running Asterisk (from svn) + libpri (from svn) + asterisk-addons > > (from svn) + asterisk gui (svn 1.4 branch) + zaptel (svn 1.4) on a > > Debian Etch box, with 1gb ram, running all of the services for my home > > server (web / db / music server etc), and i would like to run my PSTN > > line from Kingston Comms, but i can't get this box the recoginsie this > > line! > > > > The X100p is a cheap clone i got off ebay for a tenner, so im not > > expecting much, i know they have echo issues, but im going to upgrade > > to a SPA3012 / TDM400B when i have the cash. > > > > Ztcfg -vv reports > > > > orange:~# ztcfg -vv > > > > Zaptel Version: SVN-branch-1.4-r3374 > > Echo Canceller: MG2 > > Configuration > > ====================== > > > > > > Channel map: > > > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > > > 1 channels to configure. > > > > orange:~# > > > > > > and my zaptel.conf file contains > > > > orange:~# more /etc/zaptel.conf > > fxsks=1 > > loadzone=uk > > defaultzone=uk > > orange:~# > > > > but zap show status in the command line shows > > > > orange*CLI> zap show status > > Description Alarms IRQ bpviol CRC4 > > Fra Codi Options LBO > > Wildcard X100P Board 1 OK 0 0 0 > > CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) > > orange*CLI> > > > > and i think the Unk means unknown...? > > > > Does anyone have any ideas on how to get this line to work, ive > > followed every howto i can find, and google seems to be comming up > > short, as far as i can see, ztcfg should report the card as > > configured, but it isn't, and ive no idea why. > > > > Hope you can help > > > > Chris > > > > > > Try adding channels=1 to the end of your zaptel.conf to assign the > settings you have made to a channel. > > regards, > > Drew > > -- > Drew Gibson > > Systems Administrator > OANDA Corporation > www.oanda.com > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
