On Mon, 2006-11-13 at 00:57 +0100, Patrick wrote: > On Mon, 2006-11-13 at 10:45 +1100, Peter Howard wrote: > > Greetings all, > > > > I'm playing with asterisk and two Polycom VSX300 videoconferencing > > units. And I'm having zero luck getting video working over SIP. > > > > The two units register fine with asterisk, and with "allow=all" in > > sip.conf, the two units establish voice. But no video. And no obvious > > messages as to whats going wrong. The config for each is (they're > > numbered 201 and 202): > > > > [202] > > secret= > > type=friend > > context=from-sip-202 > > host=dynamic > > nat=no > > canreinvite=yes > > dtmfmode=rfc2833 > > disallow=all > > allow=all > > > > > > If you're wondering why I do the "disallow=all" immediately followed by > > "allow=all", it's because the allow line has spent a lot of time with > > restricted codecs to see if that makes a difference. > > > > I can provide the full sip.conf, extensions.conf, and debug output if > > anyone wants to see them. > > > > Any suggestions as to where things are falling down? > > Do you have "videosupport=yes" in your sip.conf?
Yes I do. I've also confirmed that I have a version of asterisk which includes the patch for H263P (which is what the Polycoms want to talk). -- Peter Howard URSYS 13 Burwood Rd, Burwood, NSW 2134 Ph: 02 8745 2816 Fax: 02 8745 2828 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
