On Tue, 2006-11-14 at 09:41 +1100, Peter Howard wrote: > On Tue, 2006-11-14 at 09:28 +1100, Peter Howard wrote: > > On Mon, 2006-11-13 at 13:42 +0800, Rosli Sukri wrote: > > > any logs/errors when you do a verbose 6 and a sip debug ? > > > > > > > I've got a log from a call under asterisk 1.4.0-beta3 attached. The > > behaviour was the same; the call connected and audio worked, but no > > video. > > > > > > And here's /var/log/asterisk/messages as well >
<sigh/> More haste, less speed. In the messages, ignore the connection failures at 9:15 - the run in question is at 9:17. > > > > > > On 11/13/06, Peter Howard <[EMAIL PROTECTED]> wrote: > > > On Mon, 2006-11-13 at 00:57 +0100, Patrick wrote: > > > > On Mon, 2006-11-13 at 10:45 +1100, Peter Howard wrote: > > > > > Greetings all, > > > > > > > > > > I'm playing with asterisk and two Polycom VSX300 > > > videoconferencing > > > > > units. And I'm having zero luck getting video working > > > over SIP. > > > > > > > > > > The two units register fine with asterisk, and with > > > "allow=all" in > > > > > sip.conf, the two units establish voice. But no > > > video. And no obvious > > > > > messages as to whats going wrong. The config for each is > > > (they're > > > > > numbered 201 and 202): > > > > > > > > > > [202] > > > > > secret= > > > > > type=friend > > > > > context=from-sip-202 > > > > > host=dynamic > > > > > nat=no > > > > > canreinvite=yes > > > > > dtmfmode=rfc2833 > > > > > disallow=all > > > > > allow=all > > > > > > > > > > > > > > > If you're wondering why I do the "disallow=all" > > > immediately followed by > > > > > "allow=all", it's because the allow line has spent a lot > > > of time with > > > > > restricted codecs to see if that makes a difference. > > > > > > > > > > I can provide the full sip.conf, extensions.conf, and > > > debug output if > > > > > anyone wants to see them. > > > > > > > > > > Any suggestions as to where things are falling down? > > > > > > > > Do you have "videosupport=yes" in your sip.conf? > > > > > > Yes I do. I've also confirmed that I have a version of > > > asterisk which > > > includes the patch for H263P (which is what the Polycoms want > > > to talk). > > > > > > -- > > > Peter Howard > > > URSYS > > > 13 Burwood Rd, > > > Burwood, NSW 2134 > > > > > > Ph: 02 8745 2816 Fax: 02 8745 2828 > > > > > > _______________________________________________ > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > > > asterisk-users mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > > > asterisk-users mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Peter Howard URSYS 13 Burwood Rd, Burwood, NSW 2134 Ph: 02 8745 2816 Fax: 02 8745 2828 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
