hmmm 2 fragen: 1. did you checked the wiring ? 2. are you using latest cvs ?
regards Michael Bielicki PS: Andio are you in cologne over christmas ? On Thursday 13 of November 2003 11:46, Ernst Lehmann wrote: > On Fri, 2003-10-24 at 17:46, Andreas Otto wrote: > > Hello list, > > Hi Andreas, > > ich habe Deine Mail auf der Liste gesehen, aber leider keine Antworten > darauf. > > Hast Du mitlerweile eine L�sung gefunden, denn ich plane auch ein System > mit der Zaptel E1 aufzubauen, und daher w�re ich stark daran > interesiert, ob sowas in Deutschland �berhaupt funktioniert. > > W�rde mich freuen von Dir was dazu zu h�ren... > > Danke vielmals.. und sorry, dass ich hier auf die Frage keine L�sung > sondern eine eigene Frage bringe :)) > > Gruss > Ernst > > > i've got some problems getting a E1 line with a E100P up and > > running (germany). > > > > # cat /proc/zaptel/1 > > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS/CRC4 YELLOW > > RED > > > > "YELLOW RED" sounds not so good. > > When launching asterisk, enabling pri debug on that span, i see > > outgoing attempts: > > > > ;---------- snip -------- > > > > > [00 01 7f ] > > > Unnumbered frame: > > > SAPI: 00 C/R: 0 EA: 0 > > > TEI: 000 EA: 1 > > > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode > > > extended) ] 0 bytes of data > > > > Sending Set Asynchronous Balanced Mode Extended > > ;---------- snip -------- > > > > Thats all. No reply from the net. > > > > I thought the problem was in the telco's side, but they > > double-checked everything and assure me that everything would be > > okay on their side. > > > > Anyone with some hints? > > > > Thanks a lot! > > - Andreas > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
