Hello list, i've got some problems getting a E1 line with a E100P up and running (germany).
# cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS/CRC4 YELLOW RED "YELLOW RED" sounds not so good. When launching asterisk, enabling pri debug on that span, i see outgoing attempts: ;---------- snip -------- > [00 01 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended ;---------- snip -------- Thats all. No reply from the net. I thought the problem was in the telco's side, but they double-checked everything and assure me that everything would be okay on their side. Anyone with some hints? Thanks a lot! - Andreas _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
