|
Hello all. I have a Digitum TE110P board configured and working (I
think that it's working). When I configure in extensions.conf to a
extension route to that board I get "Unable to create channel of type
'Zap'" on log. Here are some configuration: lspci -vv 0000:01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 795e:0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (250ns min, 32000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c800 [size=256] Region 1: Memory at fc5ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- ztcfg -vv Zaptel Configuration ====================== SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: Individual Clear channel (Default) (Slaves: 24) Channel 25: Individual Clear channel (Default) (Slaves: 25) Channel 26: Individual Clear channel (Default) (Slaves: 26) Channel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. My zaptel.cfg span=1,0,0,cas,hdb3 loadzone=us defaultzone=us bchan=1-15,17-31 dchan=16 My zapata.conf [channels] context=customer signalling=pri_cpe channel => 1 My extensions.conf exten => 4502,1,Dial(Zap/1/4502) show channels in Asterisk CLI: Channel (Context Extension Pri ) State Appl. Data 0 active channel(s) zap show channels in Asterisk CLI: Chan Extension Context Language MusicOnHold pseudo customer 1 customer zap show channel 1 in Asterisk CLI: hannel: 1> File Descriptor: 10 Span: 1 Extension: Dialing: no Context: corsidian Caller ID string: Destroy: 0 InAlarm: 0 Signalling Type: PRI Signalling Owner: <None> Real: <None> Callwait: <None> Threeway: <None> Confno: -1 Propagated Conference: -1 Real in conference: 0 DSP: no Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: alaw Fax Handled: no Pulse phone: no Echo Cancellation: 0 taps unless TDM bridged, currently OFF PRI Flags: PRI Logical Span: Implicit Actual Hookstate: Onhook When I dial 4502 in the softphone I get "Unable to create channel of type 'Zap'". Could anybody give to me a little help ? Thanks a lot ! Lincoln |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
