Is any way to get an configuration example of that? I know that we cannot send the T.38 through the Asterisk, that is I'm trying to avoid that, but there is no way to register the Sipura 2100 on the Cisco. It's not a Gatekeeper or a VoIP Server.
However there is 1.2.7.1 patch for the T.38 passthrough, I didn't tried yet. How do you send that SIP REFER to the Cisco? Gracias, Carlos Alperin -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Juan Jose Comellas Sent: Thursday, June 15, 2006 9:02 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Cisco Gateway We're using a Cisco 3660 as a T.38 gateway for fax reception, but as Asterisk does not support T.38 in pass through mode yet what we're doing is sending a SIP REFER message (via the Transfer application) to our SIP provider (when we detect fax tones) to redirect the call to the Cisco gateway. Carlos Alperin wrote: > Did someone use a 26xx, 36xx or 53xx as a T38 Gateway? > > I need to know if we can register an ata like Sipura 2100 to the cisco > equipment, or we need to register the cisco on asterisk in order to complete > the circuit. > > The documentation on the Cisco is always referred to the call manager. All > that I want is to send PRI to ATA and ATA to PRI T.38. > > Thanks, > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
