I have to check about the configuration as I'm not the one who did it.
Bear in mind that what we did was for fax reception, so the SIP REFER is
being sent to our fax provider, not to the Cisco gateway. The gateway
just receives the call after it's been redirected.
Carlos Alperin wrote:
Is any way to get an configuration example of that?
I know that we cannot send the T.38 through the Asterisk, that is I'm trying
to avoid that, but there is no way to register the Sipura 2100 on the Cisco.
It's not a Gatekeeper or a VoIP Server.
However there is 1.2.7.1 patch for the T.38 passthrough, I didn't tried yet.
How do you send that SIP REFER to the Cisco?
Gracias,
Carlos Alperin
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Juan Jose
Comellas
Sent: Thursday, June 15, 2006 9:02 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Cisco Gateway
We're using a Cisco 3660 as a T.38 gateway for fax reception, but as
Asterisk does not support T.38 in pass through mode yet what we're doing
is sending a SIP REFER message (via the Transfer application) to our SIP
provider (when we detect fax tones) to redirect the call to the Cisco
gateway.
Carlos Alperin wrote:
Did someone use a 26xx, 36xx or 53xx as a T38 Gateway?
I need to know if we can register an ata like Sipura 2100 to the cisco
equipment, or we need to register the cisco on asterisk in order to
complete
the circuit.
The documentation on the Cisco is always referred to the call manager. All
that I want is to send PRI to ATA and ATA to PRI T.38.
Thanks,
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
