I have seen conflicting references in regards to the Digium Wildcard TE411P echo settings in zapata.conf.
Does anyone have the official word on this? Should echo cancel be enabled in zapata.conf if the card has built in EC? If so, should a particular EC method be compiled into the zaptel build? My reference, which has echo: My zaptel is 1.2.5 context=from-pstn switchtype=national pridialplan=unknown prilocaldialplan=unknown priindication = outofband signalling=pri_cpe usecallerid=yes hidecallerid=no usecallingpres=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=0 callgroup=1 pickupgroup=1 useincomingcalleridonzaptransfer=yes callerid=asreceived accountcode=I musiconhold=default overlapdial=no facilityenable=yes channel => 1-23 My zconfig.h is using the default EC method. #define ECHO_CAN_KB1 I am getting echo on both SIP and ZAP (digital PRI bridged on same card) endpoints. -- -- Steven _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
