Search through the archives here for 'vpmsupport' and 'vpmdtmfsupport' and you will find quite a few discussions on this, like if you're using fax detection on the TE410 it will not work by default on the TE411, if you need fax tone detection on the TE411 you will need to use' vpmdtmfsupport=0' in your configuration for loading the wct4xxp module; this will not disable the echo canceler, just stop using it for tone detection.
Rob
On 28/04/06, Steven <[EMAIL PROTECTED]> wrote:
So if I switch between a TE411P and TE410P or vice versa, I should not change anything in my config.Correct?
--
--
Steven
"Rob Lith" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] ...On 28/04/06, Steven <[EMAIL PROTECTED]> wrote:I have seen conflicting references in regards to the Digium Wildcard TE411P echo settings in zapata.conf.
Does anyone have the official word on this?
Should echo cancel be enabled in zapata.conf if the card has built in EC?
If so, should a particular EC method be compiled into the zaptel build?If you have 'echocancel=yes' then echo cancellation is on and if you have hardware available it will use it, otherwise it will be done in software.
Rob
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
