Here you go. I'm not sure this is much use. It's a bit hard to explain as I
have one system calling another via IAX where the Queue() command is
executed... Calls are VOIP->VOIP, on our network... This case below is where
each agent (there's 6) is rung for 30sec, but the Queue aborts after 120s, not
300s!
extensions.conf(Caller):
[macro-DialIAX]
exten => s,1,Dial(IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED])
exten => s,2,Goto(s-${DIALSTATUS},1)
exten => s-ANSWER,1,Goto(s-OK,1)
exten => s-NOANSWER,1,Goto(s-ERROR,1)
exten => s-CONGESTION,1,Goto(s-ERROR,1)
exten => s-CHANUNAVAIL,1,Goto(s-ERROR,1)
exten => s-ERROR,1,Answer()
exten => s-ERROR,2,Wait,1
exten => s-ERROR,3,Set(i=1)
exten => s-ERROR,4,While($[${i} < 4])
exten => s-ERROR,5,Playback(cannot-complete-network-error)
exten => s-ERROR,6,Playback(message-number)
exten => s-ERROR,7,Playback(letters/o)
exten => s-ERROR,8,Playback(letters/e)
exten => s-ERROR,9,Playback(digits/9)
exten => s-ERROR,10,Playback(digits/0)
exten => s-ERROR,11,Playback(digits/0)
exten => s-ERROR,12,Set(i=$[${i} + 1])
exten => s-ERROR,13,EndWhile
exten => s-ERROR,14,Hangup()
exten => s-OK,1,MacroExit
...
exten => 2944000,1,Macro(DialIAX,acdserver1,q_main,oneeighty_acd)
exten => 2944000,2,NoOp(IM BACK)
extensions.conf(Callee):
exten => q_main,1,Queue(oneeighty_main||||300)
exten => q_main,2,NoOp(${QUEUESTATUS})
exten => q_main,3,NoOp(${DIALSTATUS})
exten => q_main,4,Hangup
queues.conf(Callee):
[oneeighty_main]
musiconhold = default
joinempty = strict
leavewhenempty = strict
strategy = rrmemory
timeout = 30
;retry = 0
member => Agent/80014055
member => Agent/80014057
member => Agent/80014052
member => Agent/80014051
member => Agent/80014033
member => Agent/80014050
-----Original Message-----
From: CC Jay [mailto:[EMAIL PROTECTED]
Sent: Thu 3/23/2006 11:16 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc:
Subject: Re: [Asterisk-Users] Tearing my hair out with Queues
In that case, you should post part of extensions.conf which is related
to Queues/agents, which makes it easier to troubleshoot your problem. Besides,
you haven't mentioned how incoming calls get into your queue. PSTN or VoIP
calls?
All providers set some limit on the time a call can be placed on their
trunks without being answered. For PSTN, the time limit is 90 sec. Could that
be the cause for your Queue timeout of 120 sec?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
