On Fri, January 6, 2006 15:46, Michael Sampson said: > With our current pbx system, a call comes in from the PSTN to the > receptionist. She then hits flash, which puts the caller on hold, calls > my extension, says "so and so is on the phone for you", I say "ok put > him through", she hangs up and I am connected to the caller. > > With [EMAIL PROTECTED] I can it # then the extension to transfer to and it > will ring there. But is there a simple way to announce the call before > you transfer it. If not, does anyone have any good work arounds for this. > > --
It is called attended transfer. See <http://www.voip-info.org/wiki/view/Asterisk+PBX+functions> And <http://www.voip-info.org/tiki-index.php?page=Asterisk+config+features.conf> HTH! -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 Cologne HFC-S pins #52, #54, #55 connected in parallel for synching. AMD Duron 1GHz - 1GB - * 1.2.1 2 Sweex HFC-PCI cards _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
