WipeOut . a écrit:
When last did you update from the CVS??
It's from 2003-09-04 CVS
But it curently doesn't work anyway so just hang in there and hopefully it will be fixed soon..
It's exactly what I have done, I have this log message:
NOTICE[114696]: File chan_sip.c, Line 4870 (handle_request): Nothing to
pick up
WARNING[114696]: File chan_sip.c, Line 2220 (__transmit_response):
Unable to determine sequence number from ''
>From 276 I dial 326 and trie to pickup using 273. I include my sip.conf
Regards,
Daniel
WipeOut . a ?crit:
Just add callgroup={number} and pickupgroup={number} into each SIP phone's config in the sip.conf file..
Hello,
What configuration should I use for this (I use sip phones)?
Best regards,
Daniel
WipeOut . a ?crit:
OK you are correct..
*8 picks up the call..I wonder why *8# does not work??
I also had the same problem that the phone that I collected the call from did not stop ringing..
I have problems with this as well ( similar config ). My CVS is 10 days
old.
I can get the call picked up with *8 ( *8# does not work ) but
the phone B never stops ringing.
B rings forever. I'm using SNOM200.
--Pertti
WipeOut . wrote:
I have just started to play with callgroups and pickupgroups..
I updates my * from CVS this morning (about 15 mins ago)..
I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf..
I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB..
Have I not configured somthing correctly or is there a bug??
Later.
--
**********************************************************************
Nordic LAN&WAN Communication Oy
Pertti Pikkarainen
vp of engineering
E-Mail: [EMAIL PROTECTED]
tel: +358-9-5024100
fax: +358-9-5023840
gsm: +358-500-511467
Sinikalliontie 16
02630 Espoo
FINLAND
**********************************************************************
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
;
; SIP Configuration for Asterisk
;
[general]
port = 5060 ; Port to bind to
bindaddr = 192.168.10.254 ; Address to bind to
context = SIP ; Default for incoming calls
tos=lowdelay
;tos=184
;tos=50
;rxgain=30
;txgain=30
threewaycalling=yes
allow=ALAW
disallow=GSM
disallow=ULAW
; valeurs pas defaut
;t?l?phone grandstream benoit.
[276]
mailbox=276
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[273] ;t?l?phone grandstream Antoine
mailbox=273
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[235] ; t?l?phone grandstream Arnaud
mailbox=235
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[338] ;t?l?phone grandstream Dominique
mailbox=338
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[222] ; t?l?phone grandstream Daniel
mailbox=326
type = friend
host = 192.168.0.2
canreinvite = yes
dtmf=inband
[326] ; t?l?phone grandstream Daniel
mailbox=326
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
|
