But it curently doesn't work anyway so just hang in there and hopefully it will be fixed soon..
It's exactly what I have done, I have this log message:
NOTICE[114696]: File chan_sip.c, Line 4870 (handle_request): Nothing to pick up
WARNING[114696]: File chan_sip.c, Line 2220 (__transmit_response): Unable to determine sequence number from ''
From 276 I dial 326 and trie to pickup using 273. I include my sip.conf
Regards,
Daniel
WipeOut . a �crit:
>Just add callgroup={number} and pickupgroup={number} into each SIP phone's config in the sip.conf file..
>
> >
>>Hello,
>>
>>What configuration should I use for this (I use sip phones)?
>>
>>Best regards,
>>
>>Daniel
>>
>>
>>WipeOut . a ?crit:
>>
>> >>
>>>OK you are correct..
>>>
>>>*8 picks up the call..I wonder why *8# does not work??
>>>
>>>I also had the same problem that the phone that I collected the call from did not stop ringing..
>>>
>>>
>>> >>>
>>> >>>
>>>>I have problems with this as well ( similar config ). My CVS is 10 days >>>>old.
>>>>
>>>>I can get the call picked up with *8 ( *8# does not work ) but >>>>the phone B never stops ringing.
>>>>B rings forever. I'm using SNOM200.
>>>>
>>>>--Pertti
>>>>
>>>>
>>>>WipeOut . wrote:
>>>>
>>>> >>>>
>>>> >>>>
>>>>>I have just started to play with callgroups and pickupgroups..
>>>>>
>>>>>I updates my * from CVS this morning (about 15 mins ago)..
>>>>>
>>>>>I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf..
>>>>>
>>>>>I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB..
>>>>>
>>>>>Have I not configured somthing correctly or is there a bug??
>>>>>
>>>>>Later.
>>>>>
>>>>>
>>>>> >>>>>
>>>>> >>>>>
>>>>-- >>>>
>>>>**********************************************************************
>>>>Nordic LAN&WAN Communication Oy
>>>>Pertti Pikkarainen
>>>>vp of engineering
>>>>E-Mail: [EMAIL PROTECTED]
>>>>tel: +358-9-5024100
>>>>fax: +358-9-5023840
>>>>gsm: +358-500-511467
>>>>
>>>>Sinikalliontie 16
>>>>02630 Espoo
>>>>FINLAND
>>>>
>>>>**********************************************************************
>>>>
>>>>
>>>>
>>>>_______________________________________________
>>>>Asterisk-Users mailing list
>>>>[EMAIL PROTECTED]
>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> >>>>
>>>> >>>>
>>> >>>
>>> >>>
>>-- >>Daniel ANDRE (mailto:[EMAIL PROTECTED])
>>IRIS Technologies - http://www.iris-tech.com
>>Serveur kwartz - http://www.kwartz.com
>>
>> >>
>
> >
-- Daniel ANDRE (mailto:[EMAIL PROTECTED]) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com
; ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to bindaddr = 192.168.10.254 ; Address to bind to context = SIP ; Default for incoming calls tos=lowdelay ;tos=184 ;tos=50 ;rxgain=30 ;txgain=30 threewaycalling=yes
allow=ALAW disallow=GSM disallow=ULAW
; valeurs pas defaut
;t�l�phone grandstream benoit. [276] mailbox=276 type = friend host = dynamic canreinvite = yes dtmf=inband pickupgroup=1 callgroup=1
[273] ;t�l�phone grandstream Antoine mailbox=273 type = friend host = dynamic canreinvite = yes dtmf=inband pickupgroup=1 callgroup=1
[235] ; t�l�phone grandstream Arnaud mailbox=235 type = friend host = dynamic canreinvite = yes dtmf=inband pickupgroup=1 callgroup=1
[338] ;t�l�phone grandstream Dominique mailbox=338 type = friend host = dynamic canreinvite = yes dtmf=inband pickupgroup=1 callgroup=1
[222] ; t�l�phone grandstream Daniel mailbox=326 type = friend host = 192.168.0.2 canreinvite = yes dtmf=inband
[326] ; t�l�phone grandstream Daniel mailbox=326 type = friend host = dynamic canreinvite = yes dtmf=inband pickupgroup=1 callgroup=1
-- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
