But there were some ppl who did run E&M on E1. It was on the list, search archives.
regards Martin On Wed, 3 Sep 2003, Steve Underwood wrote: > Paulo Mannheimer wrote: > > >Hi, > > > >I'm testing an E1 with E&M signaling. Some of the problems I'm running > >into are the following: > > > >1) if I try to configure any channel above channel 15, I start > >getting a "multiframe alignment error" on my telco test equipment. So I > >have my zaptel file only configured for 15 channels, like this > > > >span=1,1,0,cas,hdb3 > >e&m=1-15 > > > >2) When the test equipment tries to send me a DTMF string, I only > >get the first one. > > > >Any thoughts? > > > Is E&M designed to work with the E1 driver code? I think probably not. I > had to fix some things to get proper access to the CAS signaling bits > when I implemented MFC/R2. That makes me strongly suspect that nobody > else has tried any form of CAS signaling with the E1 drivers. If you are > using recent CVS code, the CAS bits certainly work for all time slots > (they only worked for the first 15 before), but that doesn't mean that > E&M will work. Note that E&M on E1s is implemented differently for just > about every Telco that offers it. > > Regards, > Steve > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
