Hi all- This question is for those familiar with EuroISDN setup.
I have a customer in Europe where I'm going to install an asterisk based system with 4 E1's. The customer will configure them all in one large hunt group. My question is about the E1 channel configuration. I know that usually single E1 spans are set up with 30 channels (1-15 and 17-31) as the voice (bearer) channels and channel 16 as the signalling (data) channel. (I think Channel 32 is unused in E1 setups) But if there are multiple E1's in the same group, is it typical to have one data channel supplying signalling for the entire group? ...or is there usually 1 D channel per E1? If the latter, is the setup something like this: B channels 1-15, 17-31 D channel 16 B channels 33-47, 49-63 D channel 48 ...etc...?? Thanks in advance for any advice Scott Stingel Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England URL: www.evtmedia.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
