it is option 2 since asterisk does not support option 1 :) On Saturday 09 August 2003 10:19 am, Scott Stingel wrote: > Hi all- > > This question is for those familiar with EuroISDN setup. > > I have a customer in Europe where I'm going to install an asterisk based > system with 4 E1's. The customer will configure them all in one large hunt > group. > > My question is about the E1 channel configuration. I know that usually > single E1 spans are set up with 30 channels (1-15 and 17-31) as the voice > (bearer) channels and channel 16 as the signalling (data) channel. (I > think Channel 32 is unused in E1 setups) > > But if there are multiple E1's in the same group, is it typical to have one > data channel supplying signalling for the entire group? ...or is there > usually 1 D channel per E1? If the latter, is the setup something like > this: > > B channels 1-15, 17-31 > D channel 16 > B channels 33-47, 49-63 > D channel 48 ...etc...?? > > Thanks in advance for any advice > Scott Stingel > > > > Scott M. Stingel > Emerging Voice Technology Inc. > Palo Alto, California and London, England > > URL: www.evtmedia.com > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
