You may not be asking for the correct data points.
Perhaps
SYSEVENT REQ(F)ASD
will give you what you want.
On Sat, 21 Sep 2019 21:16:55 -0400 Brian Westerman
<[email protected]> wrote:
:>On this run, the job ran for ~23 seconds and used the following:
:>IEF373I STEP/SOAKER /START 2019264.1453
:>IEF032I STEP/SOAKER /STOP 2019264.1453
:> CPU: 0 HR 00 MIN 17.17 SEC SRB: 0 HR 00 MIN 01.86 SEC
:> VIRT: 8K SYS: 240K EXT: 0K SYS: 10788K
:> ATB- REAL: 20K SLOTS: 0K
:> VIRT- ALLOC: 10M SHRD: 0M
:>
:>the code and the values are as follows:
:>
:>TIMEUSED STORADR=DBLWD1
:>
:>>>>>> dblwd1 at this point is 00000000B57E2F00
:>
:>LM R0,R1,DBLWD1
:>SRDL R0,12
:>D R0,K10000
:>CVD R1,DBLWD2
:>
:>>>>>> R1 at this point is 0000004A
:>
:>STRING (DBLWD2+4,P,L),INTO=CPUTIME
:>
:>>>>>> CPUTIME at this point is 74 Which doesn't really make any sense to me
as I would expect it to be somewhere around 17.
:>
:>
:>K10000 DC F'10000'
:>
:>
:>
:>
:>
:>On Sat, 21 Sep 2019 22:11:01 +0300, Binyamin Dissen
<[email protected]> wrote:
:>
:>>I would suggest looking at the value in DBLWD1. Then you can figure out what
:>>to do.
:>>
:>>On Sat, 21 Sep 2019 06:26:16 -0400 Brian Westerman
:>><[email protected]> wrote:
:>>
:>>:>I know I'm doing something wrong, but I can't get the output from TIMEUSED
to give me a valid time used
:>>
:>>:>In the program I have
:>>
:>>:> TIMEUSED STORADR=DBLWD1
:>>:> LM R0,R1,DBLWD1
:>>:> SRDL R0,12
:>>:> D R0,K10000
:>>:> CVD R1,DBLWD2
:>>:> STRING (DBLWD2+4,P,L),INTO=CPUTIME
:>>
:>>:>K10000 DC F'10000'
:>>
:>>:>What I end up with in CPUTIME is (in this case) 324 for a job that ran all
of 3 seconds (wall clock time) when my job stats show:
:>>:>CPU: 0 HR 01 MIN 05.27 SEC SRB: 0 HR 00 MIN 06.53 SEC
:>>
:>>:>I should be getting something like 65 (unless SRB is included when I
would expect 71)
:>>
:>>:>I am obviously doing something wrong. I tried it using load grande and
got the same results, so I went back to LM.
:>>
:>>:>any help at all would be appreciated.
:>>
:>>--
:>>Binyamin Dissen <[email protected]>
:>>http://www.dissensoftware.com
:>>
:>>Director, Dissen Software, Bar & Grill - Israel
:>>
:>>
:>>Should you use the mailblocks package and expect a response from me,
:>>you should preauthorize the dissensoftware.com domain.
:>>
:>>I very rarely bother responding to challenge/response systems,
:>>especially those from irresponsible companies.
--
Binyamin Dissen <[email protected]>
http://www.dissensoftware.com
Director, Dissen Software, Bar & Grill - Israel
Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.
I very rarely bother responding to challenge/response systems,
especially those from irresponsible companies.
