Hi,
I have a rpi4/8GB installed with openbsd which runs fine. I've been trying the
same installation method [1] with a rpi5/16GB machine using install78.img
(have also tried install79.img) and the boot process gets as far as
showing the blue and tan u-boot image in the top right of the screen
and that's it. The message
OpenBSD BOOTAA64 boot>
never apears, so cannot proceed with the installation.
(I'd also like to see it appear in order to set tty fb0 temporarily as
have no spare serial cable right this minute)
As far as I'm aware there is no https://github.com/pftf/RPi4 equivalent
for rpi5, so can't replace what's in the msdos part of the install img with
that.
The machine has been configured via raspi-config to boot from usb/nvme first
then try microsd. I have tried with install79.img as well, same results.
The only thing I've not tried so far is booting an image written to
microsd but this wasn't the method i used for the pi4 (for some reason I'm
remembering it was a requirement to boot the installation media from
usb. Might be misremembering though).
[1] write the image to a usb key and boot from it.
Is there something more I need to do to the install media to get the rpi5 to
boot?
thanks in advance for advice,
--
